
The AirTAC GAFR Adjustable Filter Regulator GAFR30008SNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30008SNT is a filter and regulator combined into a single body, replacing the need for separate GAF and GAR units. This 1/4in port model handles a standard pressure range of 0.15-0.9 MPa (20-130 psi) and comes with a 40 um filter element.
Its diversion structure spins incoming air to separate liquid water and solid particles into the 60 cc drain bowl. The balanced regulator mechanism holds the outlet pressure steady as supply varies, and the pressed-in self-locking knob resists drift from vibration. This unit does not lubricate. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30008SNT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a single pneumatic clamp or fixture on an assembly bench. The 1/4in port and 500 g weight suit compact, stationary setups where stable pressure is needed for consistent clamping force.
Supply a manual test station or calibration jig. The 40 um element protects sensitive components, while the semi-auto drain allows quick manual purging of condensate between test cycles.
Mount on a mobile service cart to provide filtered, regulated air for pneumatic tools. The compact size and included bracket make it easy to install on a small panel or frame.
Choose the GAFR300 body for 1/4in or 3/8in ports, with a 60 cc drain bowl and a flow curve plotted to 3500 L/min at 0.7 MPa inlet. The PC bowl is the standard build; metal (C) and nylon (N) are alternatives with the same pressure and temperature ratings. This model includes the mounting bracket, a 40 um element, and both semi-auto and manual drains. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If you need a gauge, select a model without the N code, as the 1/8in gauge connection is not fitted here. For lines requiring oil downstream, order the matching GAFC300-08 combination instead. Note that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
The GAFR30008SNT is a filter & regulator with a 1/4in port, 60 cc drain bowl, and 500 g weight. It operates from 0.15-0.9 MPa (20-130 psi), with a maximum pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C. It has a 40 um element and semi-auto plus manual drains.
The N code in GAFR30008SNT means no gauge is supplied. The 1/8in gauge connection is still present if you want to add one later. Without a gauge, you cannot read the set pressure directly, so you would need to rely on the regulator knob position or install a separate gauge.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.