
The AirTAC GAFR Adjustable Filter Regulator GAFR30008SNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR30008SNTK is a filter and regulator combined into a single body, saving rail space and reducing potential leak points compared to separate units. It handles 1/4in ports and delivers a standard pressure range of 0.15-0.9 MPa (20-130 psi) with a 40 um filter element.
This 500 g unit features a diversion structure that spins incoming air to separate liquid water and solid particles into its 60 cc condensate bowl. The balanced regulator mechanism holds the outlet pressure steady as supply varies, and the pressed-in self-locking knob resists drift from vibration, though no gauge is fitted for direct reading. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30008SNTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a single precision clamping fixture or a small indexing table that needs clean, regulated air at a steady pressure for consistent holding force.
Supply a laboratory test bench or calibration rig where a 40 um filter protects sensitive instrumentation and the regulator maintains a stable test pressure.
Power a manual assembly station with a pneumatic screwdriver or small actuator, where the compact 500 g body mounts easily to a frame or panel.
Choose the GAFR300 body for 1/4in or 3/8in ports; it offers a 3500 L/min flow envelope at 0.7 MPa inlet, a step up from the GAFR200's 2000 L/min. This model has a PC bowl, semi-auto plus manual drains, a standard pressure type, an included mounting bracket, and no gauge (the 1/8in gauge connection is available for adding one).
The 40 um element suits general shop air, while the reverse-flow (reflux) valve is fitted as an ordering option. If your line needs oil downstream, order the matching GAFC300-08 combination instead. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
This filter & regulator has a working pressure range of 0.15-0.9 MPa (20-130 psi), a max pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 60 cc drain bowl, and weighs 500 g. The port size is 1/4in and it comes with a 40 um element.
The 'K' indicates a reverse-flow (reflux) valve is fitted to this unit. It is an ordering difference from the standard model; the catalogue does not detail its function in the available data. This model also has no gauge, so you would need to add one to read the outlet pressure.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.