
The AirTAC GAFR Adjustable Filter Regulator GAFR30008SWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The AirTAC GAFR30008SWT combines an air filter and a pressure regulator in a single body, saving rail space and reducing potential leak points compared to separate units. It handles 1/4in ports, regulates from 0.15 to 0.9 MPa (20-130 psi), and uses a 5 um element to trap fine particles for sensitive equipment.
A diversion structure spins incoming air to separate liquid water and solid debris into the 60 cc condensate bowl. The balanced, self-locking regulator keeps the outlet pressure steady as supply varies, and the pressed-in knob resists drift from vibration. This model includes a circular gauge with MPa/psi scale and a mounting bracket. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR30008SWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a single precision pneumatic valve or small actuator with clean, regulated air. The 5 um element protects tight internal clearances from particle wear.
Supply a laboratory or workbench pneumatic test setup with a stable 0.15-0.9 MPa output. The integrated gauge lets you verify set pressure at a glance.
Mount this 500 g unit directly on a small machine frame or panel. Its single-body design reduces the footprint compared to separate filter and regulator components.
Choose the GAFR300 body for 1/4in or 3/8in ports, with a 3500 L/min flow envelope at 0.7 MPa inlet and a 60 cc drain bowl. The PC bowl suits general-purpose lines; select the metal (C) or nylon (N) bowl for different build preferences, though all share the same 1.0 MPa max and -5 to 70 C range. This unit ships with both semi-auto and manual drains, a mounting bracket, and a 5 um element for finer filtration than the standard 40 um. The NPT thread means the gauge reads MPa/psi; if you need oil downstream, order the matching GAFC300-08 combination instead of this filter-regulator. Remember that a 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
Working pressure range is 0.15-0.9 MPa (20-130 psi), with a 1.0 MPa (145 psi) maximum and 1.5 MPa (215 psi) proof pressure. Temperature range is -5 to 70 C. The drain bowl holds 60 cc and the unit weighs 500 g. It has a 1/4in port and a 5 um filter element.
The 'W' code specifies a 5 um element, which traps much finer particles than the standard 40 um. This is suited for precision valves, instrument air, or other applications where small contaminants could cause issues. The finer element will require more frequent service or replacement compared to a 40 um element.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.