
The AirTAC GAFR Adjustable Filter Regulator GAFR300C08ALJT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C08ALJT is a filter & regulator in one body, combining a diversion-type filter and a balanced pressure regulator without any lubricator. It handles a 1/4in port, delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi), and uses a 40 um element to trap solids and liquid water.
Its metal bowl holds 60 cc of condensate, and the unit weighs 500 g. The automatic drain clears collected water without manual intervention, making it suitable for wet or unattended lines. The pressed-in self-locking knob resists set-pressure drift from vibration. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C08ALJT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a single pneumatic jig or fixture on an assembly bench where a stable 0.15-0.4 MPa supply protects delicate clamping forces.
Supply a low-pressure branch to a pressure sensor or pilot valve, using the 40 um element to keep particles out of small orifices.
Mount on a humid compressor line where the automatic drain and metal bowl handle frequent condensate without manual emptying.
Choose the GAFR300C08ALJT when you need a compact 1/4in filter & regulator with a metal bowl and automatic drain. The L-type lower pressure range tops out at 0.4 MPa, so confirm your system never requires more than that. The J code means no mounting bracket is included, so plan for a panel mount or use an existing bracket. The circular gauge is fitted with an MPa/psi scale, and the NPT thread matches common local piping. If you need finer filtration, select the W option for a 5 um element; if oil is required downstream, order the matching GAFC300-08 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
The GAFR300C08ALJT is a filter & regulator with a 1/4in port, a lower pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 60 cc drain bowl, and weighs 500 g. It uses a 40 um element and has an automatic drain.
The C code specifies a metal bowl, which is a build choice for the condensate chamber; the common specification of 1.0 MPa max and -5 to 70 C applies to all bowl materials. The J code means the mounting bracket is not included, so you must use a panel mount or an existing bracket rather than relying on the included bracket.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.