
The AirTAC GAFR Adjustable Filter Regulator GAFR300C08ALNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C08ALNTK is a filter and regulator combined into a single body, handling both air preparation steps without needing separate components. It operates in the lower pressure band of 0.15-0.4 MPa (20-58 psi) and uses a 40 um element to trap solids while the diversion structure spins out liquid water into the 60 cc metal bowl.
This model comes with an automatic drain that purges condensate without manual intervention, and it includes a mounting bracket for secure installation. The metal bowl suits demanding environments, and the reverse-flow valve is fitted as an ordering difference. With a weight of 500 g, this unit is built for a 1/4in line where space and reliability matter. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C08ALNTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a sensitive pneumatic valve or a small indexing table that requires a stable, lower regulated pressure. The balanced regulator holds the setpoint as supply varies, and the 40 um element protects the valve internals from particle wear.
Mount this 500 g unit on a small assembly fixture or a benchtop press where rail space is tight. The single-body design replaces two separate parts, reducing potential leak points and simplifying the plumbing layout.
Use the automatic drain on a line with high humidity or frequent condensate formation. The 60 cc bowl collects water and solids, and the auto drain purges it without requiring an operator to remember a manual valve.
Choose the GAFR300C08ALNTK when your application needs a compact 1/4in filter-regulator with a lower pressure ceiling. The metal bowl is specified here, while PC and nylon options exist for other environments; the automatic drain handles wet lines without manual checks. The included bracket simplifies mounting, and the 40 um element is the standard grade for general shop air.
This unit has no gauge, so the 1/8in gauge connection is available if you add one later. The NPT thread matches common local fittings, and the reverse-flow valve is present as a specified option. If you need lubrication downstream, order the GAFC300-08 combination instead. For sizing, the 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
The GAFR300C08ALNTK is a filter and regulator with a 1/4in port. Pressure range is 0.15-0.4 MPa (20-58 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 60 cc, and the unit weighs 500 g. It uses a 40 um element and has an automatic drain.
The L code designates a lower pressure type, capping the regulated output at 0.4 MPa (58 psi) for applications that need gentle, consistent pressure. The N after the port means no gauge is supplied; the 1/8in gauge connection is there if you want to add one. This keeps the unit compact and cost-effective for low-pressure duties.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.