
The AirTAC GAFR Adjustable Filter Regulator GAFR300C08ASJNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C08ASJNWT is a filter and regulator combined into a single body, so it cleans incoming air and sets a steady outlet pressure without needing a separate filter plus regulator pair. This model uses a 1/4in port, a metal bowl, and a 5 um element, with a working range of 0.15-0.9 MPa (20-130 psi).
Its automatic drain clears condensate without manual attention, and the 60 cc bowl collects water and solids spun out by the diversion structure. Weighing 500 g, it suits compact machine builds where a separate filter and regulator would take up extra rail space. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C08ASJNWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a precision pneumatic valve with the 5 um element to keep fine particles from affecting spool movement, while the regulator holds a steady pressure for consistent actuation.
Mount this 500 g unit on a small machine frame where a separate filter and regulator would not fit. The automatic drain keeps the line running in wet conditions without manual checks.
Use the 5 um filtration to protect sensitive instruments from fine contamination, with the regulator set to a stable pressure for reliable readings.
Choose the GAFR300 body for 1/4in or 3/8in ports; the GAFR400 offers a larger 100 cc bowl and a flow envelope plotted to 7000 L/min at 0.7 MPa inlet if you need more capacity. The metal bowl here suits demanding environments, while the 5 um element traps finer particles than the standard 40 um for precision applications. This model has an automatic drain, no mounting bracket, and no gauge, so plan for a panel mount and add a gauge to the 1/8in connection if you need to read set pressure. The NPT thread carries an MPa/psi gauge scale, and since there is no reflux valve, reverse flow is not addressed. If your line needs lubrication downstream, order the matching GAFC300-08 combination instead. With a 1.0 MPa max supply, you have about 0.1 MPa of headroom above the 0.9 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/4in port, a working pressure range of 0.15-0.9 MPa (20-130 psi), and a maximum pressure of 1.0 MPa (145 psi). Proof pressure is 1.5 MPa (215 psi), and the temperature range is -5 to 70 C. The drain bowl holds 60 cc, and the unit weighs 500 g. It uses a 5 um element and has an automatic drain.
The J code means the mounting bracket is omitted, so you need a panel mount or an existing bracket. The N code after the port means no gauge is supplied, but the 1/8in gauge connection is there if you add one later. These options reduce cost when you already have mounting and pressure indication solutions.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.