
The AirTAC GAFR Adjustable Filter Regulator GAFR300C08ASJNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C08ASJNWTK is a filter and regulator combined into a single body, so incoming air is cleaned and then set to a steady outlet pressure without needing separate units. This 1/4in version operates from 0.15 to 0.9 MPa (20-130 psi) and uses a 5 um element to trap fine particles before they reach downstream components.
With a metal bowl and an automatic drain, this unit suits lines where condensate must be expelled without manual attention. The 60 cc bowl collects water and solids spun out by the diversion structure, and the 500 g body needs a proper panel or frame mount rather than support from the tubing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C08ASJNWTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a bank of precision pneumatic valves on a small assembly station where the 5 um element protects fine internal passages from particle wear.
Supply one air cylinder on a packaging machine with stable 0.15-0.9 MPa pressure, using the automatic drain to handle condensate from a humid plant line.
Provide clean, regulated air to a laboratory test jig where the metal bowl resists rough handling and the 60 cc capacity supports moderate duty cycles.
Choose the GAFR300 body for 1/4in ports with a 60 cc drain bowl and a flow envelope plotted to 3500 L/min at 0.7 MPa inlet. The metal bowl (C) is a build choice for the environment, while the automatic drain (A) handles wet lines without manual checks. This model omits the bracket (J) and gauge (N), so plan for panel mounting and add a gauge to the 1/8in connection if readout is needed. The 5 um element (W) filters finer than the standard 40 um, and the reverse-flow valve (K) is fitted as an ordering difference. If oil is needed downstream, order the matching GAFC300-08 combination instead. 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
Working pressure is 0.15-0.9 MPa (20-130 psi); maximum pressure is 1.0 MPa (145 psi); proof pressure is 1.5 MPa (215 psi). Temperature range is -5 to 70 C and must not freeze. The drain bowl holds 60 cc and the unit weighs 500 g.
The N after the port means no gauge is supplied, so the set pressure cannot be read without adding one to the 1/8in gauge connection. The J code omits the mounting bracket, which suits panel-mount installations or existing brackets; without it, support the 500 g body from a frame, not the tubing.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.