
The AirTAC GAFR Adjustable Filter Regulator GAFR300C08AST is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C08AST is a filter and regulator combined into a single body, so incoming air is cleaned and then set to a steady outlet pressure without needing separate components. This unit has a 1/4in port, a standard pressure range of 0.15-0.9 MPa (20-130 psi), and a 40 um element that traps solid particles.
The metal bowl holds 60 cc of condensate and is drained automatically, which suits unattended operation. Weighing 500 g, this size class needs proper panel or frame mounting rather than support from the tubing, unlike the lighter GAFR200 at 290 g. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C08AST |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a single pneumatic actuator on a small assembly station, where the 40 um element protects the valve pilot and the regulator holds a stable setpoint.
Use on a factory air drop with frequent condensate, since the automatic drain clears the 60 cc bowl without operator rounds.
Provide filtered, regulated air to a benchtop test fixture, with the metal bowl standing up to shop floor conditions.
Choose the GAFR300 body when a 1/4in port with a 60 cc drain bowl and a 3500 L/min flow envelope (plotted at 0.7 MPa inlet) fits your line. The metal bowl is a build choice for environments where you want extra robustness, though the common 1.0 MPa max pressure and -5 to 70 C range apply to all bowl materials. This model has an automatic drain, so it handles wet lines without manual attention, and the included mounting bracket simplifies installation. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If the line needs oil downstream, order the matching GAFC300-08 combination instead. Max supply 1.0 MPa leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
The GAFR300C08AST is a filter and regulator with a 1/4in port, standard pressure range of 0.15-0.9 MPa (20-130 psi), and a maximum pressure of 1.0 MPa (145 psi). Proof pressure is 1.5 MPa (215 psi), temperature range is -5 to 70 C, the drain bowl holds 60 cc, and the unit weighs 500 g.
The automatic drain expels condensate from the 60 cc bowl without manual intervention, making it suitable for wet lines or unattended operation. A manual drain is not fitted on this A-code version.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.