
The AirTAC GAFR Adjustable Filter Regulator GAFR300C08LJNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C08LJNTK is a filter and regulator combined into a single body, removing the need for separate GAF and GAR units. This 1/4in port model handles a lower pressure band of 0.15-0.4 MPa (20-58 psi) with a 40 um element, and its metal bowl suits demanding environments.
A diversion structure spins incoming air to separate liquid water and solid particles into the 60 cc drain bowl, while the balanced regulator maintains a steady outlet as supply pressure fluctuates. The pressed-in self-locking knob resists drift from vibration, and the reverse-flow valve is fitted as an ordering difference. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C08LJNTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a single clamping fixture on a light assembly bench where the lower 0.15-0.4 MPa band prevents over-clamping delicate parts. The metal bowl shrugs off incidental impacts in a busy manual workstation.
Supply a lab bench pneumatic circuit that needs filtered air at a stable, low pressure for sensitive test fixtures. The 40 um element and balanced regulator keep the outlet steady as the shop compressor cycles.
Install this unit directly into an existing control panel using the 1/8in gauge port, since the J code omits the mounting bracket. The compact 500 g body fits tight spaces while the semi-auto drain allows quick manual purging.
Choose the GAFR300 body for 1/4in or 3/8in ports, with a 3500 L/min flow envelope plotted at 0.7 MPa inlet. The metal bowl (C) is a build choice with the same 1.0 MPa max and -5 to 70 C rating as PC or nylon, so confirm compatibility for aggressive surroundings. This model has a semi-auto plus manual drain, no mounting bracket (J), and no gauge - the 1/8in gauge connection is ready if you add one later. The lower-pressure type (L) tops out at 0.4 MPa, so if your machine may need more, select the standard S type instead. For lines needing oil downstream, order the matching GAFC300-08 combination. With a 1.0 MPa max supply, you have about 0.6 MPa headroom above the 0.4 MPa top of this unit's regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/4in port, a lower pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The metal drain bowl holds 60 cc, and the unit weighs 500 g with a 40 um element.
The L code sets the regulated band to 0.15-0.4 MPa, ideal for applications that must never exceed that ceiling. The N code means no gauge is supplied, but the 1/8in gauge connection is present if you need to add one. The K code includes a reverse-flow valve as an ordering difference.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.