
The AirTAC GAFR Adjustable Filter Regulator GAFR300C08LJNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C08LJNWT is a filter and regulator combined in a single body, replacing a separate filter plus regulator pair and reducing potential leak points. It delivers air filtered to 5 um and regulated to a lower pressure band of 0.15-0.4 MPa (20-58 psi), with a metal bowl protecting the 60 cc condensate chamber.
This 500 g unit uses a diversion structure that spins the airflow to separate liquid water and solid particles into the bowl. The balanced regulator mechanism holds the outlet steady as supply pressure varies, and the pressed-in self-locking knob resists drift from vibration. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C08LJNWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a 5 um filtered, low-pressure air supply to precision pneumatic valves that require stable 0.15-0.4 MPa actuation without pressure spikes.
Supply clean, regulated air to laboratory instruments and analytical equipment where fine filtration and a limited pressure ceiling protect sensitive internal components.
Power small assembly fixtures and single actuators on a bench, where the compact 500 g body mounts directly to a panel and the 60 cc bowl handles light condensate.
Choose the GAFR300 body for 1/4in porting with a 60 cc drain bowl, sitting between the smaller GAFR200 (25 cc) and larger GAFR400 (100 cc). The metal bowl (C) suits demanding environments, while the 5 um element (W) traps finer particles for sensitive equipment. This model has no bracket (J) for panel mounting and no gauge (N), so the 1/8in gauge connection is ready for a field-installed unit.
The semi-auto and manual drains are both fitted, and the lower-pressure type (L) caps output at 0.4 MPa. If oil is needed downstream, order the GAFC300-08 combination instead. A 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so plan the inlet pressure accordingly.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
The GAFR300C08LJNWT is a filter & regulator with a 1/4in port, 5 um element, and lower pressure range of 0.15-0.4 MPa (20-58 psi). Maximum pressure is 1.0 MPa (145 psi), proof pressure is 1.5 MPa (215 psi), and temperature range is -5 to 70 C. The drain bowl holds 60 cc and the unit weighs 500 g.
The J code omits the mounting bracket for panel-mount installations, and the N code means no gauge is supplied. The 1/8in gauge connection remains available if you add a gauge later. This configuration suits existing brackets and remote monitoring setups.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.