
The AirTAC GAFR Adjustable Filter Regulator GAFR300C08LNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
This AirTAC GAFR300C08LNWT is a filter and regulator combined into a single body, so the incoming air is cleaned and then set to a steady outlet pressure without needing separate units. It has a 1/4in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a 5 um element that traps fine particles for sensitive equipment.
The metal bowl holds 60 cc of condensate, and the unit weighs 500 g, placing it in the mid-size class for shop air lines. A 5 um element means more frequent service than a standard 40 um version, but it protects precision valves and instruments from finer contamination. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C08LNWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a bank of small precision pneumatic valves that need clean, regulated air at a stable lower pressure. The 5 um element keeps fine particles out of tight valve clearances.
Supply a laboratory or workbench test setup where a consistent 0.15-0.4 MPa output is required. The metal bowl suits a workshop environment and the semi-auto drain gives manual control.
Protect a single air cylinder or rotary actuator on a light assembly station. The compact 500 g body mounts directly to the machine frame with the included bracket.
Choose the GAFR300 body for 1/4in or 3/8in ports, with a flow curve plotted to 3500 L/min at 0.7 MPa inlet; step up to the GAFR400 for a 100 cc bowl and 7000 L/min envelope if you need more capacity. The metal bowl (C) is a build choice for the same 1.0 MPa max pressure and -5 to 70 C range as PC or nylon, so confirm compatibility with your environment. This model has the semi-auto and manual drains, a 5 um element, no gauge (the 1/8in connection is ready for one), and the mounting bracket included. The L type tops out at 0.4 MPa, so if your machine may ever need more pressure, select the S type instead. For lines needing oil downstream, order the matching GAFC300-08 combination rather than this unit. 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
The GAFR300C08LNWT is a filter & regulator with a 1/4in port, lower-pressure range of 0.15-0.4 MPa (20-58 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature range -5 to 70 C, 60 cc drain bowl, and 500 g weight. It has a 5 um element, metal bowl, semi-auto+manual drain, and no gauge.
The L code sets the regulated range to 0.15-0.4 MPa, which suits applications needing a stable low pressure. The N after the port means no gauge is supplied, but the 1/8in gauge connection is ready for one to be added later. The metal bowl is a build choice with the same pressure and temperature ratings as PC or nylon.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.