
The AirTAC GAFR Adjustable Filter Regulator GAFR300C08LTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C08LTK is a filter and pressure regulator combined in a single body, saving rail space and reducing potential leak points compared to separate units. It handles a 1/4in port with a lower pressure range of 0.15-0.4 MPa (20-58 psi) and uses a 40 um filter element.
This metal-bowl version includes a circular gauge with MPa/psi scale and a reverse-flow valve fitted. The diversion structure spins incoming air to separate liquid water and solid particles into the 60 cc drain bowl, while the balanced regulator holds the set outlet pressure steady as supply varies. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C08LTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Use the lower 0.15-0.4 MPa band for sensitive pneumatic controls that need a stable, low regulated pressure without the resolution loss of a wider-range regulator.
The combined filter-regulator body with included bracket mounts neatly on a machine frame, feeding a single 1/4in actuator or small valve manifold with filtered air.
Fit this unit on a bench or small panel to supply clean, regulated air to hand tools or fixtures, with the metal bowl protecting against knocks in a busy workshop.
Choose the GAFR300 body for 1/4in or 3/8in port lines needing a 60 cc condensate bowl and 500 g weight class. The metal bowl (C) suits demanding environments; confirm compatibility for aggressive surroundings. This model includes the mounting bracket and a circular gauge (MPa/psi scale), with a semi-auto plus manual drain for flexible service. The lower-pressure type (L) tops out at 0.4 MPa, so verify your system never needs more. The 40 um element handles general shop air. The K code adds a reverse-flow valve, noted as an ordering difference. If downstream lubrication is required, order the matching GAFC300-08 combination instead. 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
The GAFR300C08LTK is a filter & regulator with a 1/4in port, 0.15-0.4 MPa (20-58 psi) working range, 1.0 MPa (145 psi) max pressure, 1.5 MPa (215 psi) proof pressure, -5 to 70 C temperature range, 60 cc drain bowl, and 500 g weight. It uses a 40 um element and has a semi-auto plus manual drain.
The K code indicates a reverse-flow (reflux) valve is fitted. This is an ordering difference from models without K. The catalogue does not detail its function in our data, so refer to the official AirTAC documentation for operational details.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.