
The AirTAC GAFR Adjustable Filter Regulator GAFR300C08SJNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C08SJNTK is a filter and regulator combined into a single body, so the incoming air is cleaned and then set to a steady outlet pressure without needing separate units. This model uses a 1/4in port, has a metal bowl, and works across 0.15-0.9 MPa (20-130 psi) with a 40 um element.
A diversion structure inside spins the air to separate liquid water and solid particles into the 60 cc drain bowl, while the balanced regulator holds the set pressure as supply varies. The pressed-in self-locking knob resists drift from vibration, and the unit weighs 500 g, so it needs a proper panel mount rather than support from the tubing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C08SJNTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a single precision pneumatic valve or a small indexing table where a steady 0.15-0.9 MPa supply is needed and the 40 um element protects the valve internals from pipe scale.
Mount on a lathe or milling machine to filter condensate from the shop air and regulate the pressure for a work-holding fixture or a coolant valve, with the metal bowl standing up to the shop environment.
Use on an assembly bench to power a pneumatic screwdriver or a small press, where the semi-auto drain lets an operator purge the 60 cc bowl between shifts and the no-gauge version keeps the footprint compact.
Choose the GAFR300 body for 1/4in or 3/8in ports; the 500 g weight and 60 cc drain bowl sit between the smaller GAFR200 and the larger GAFR400. The metal bowl (C) is a build choice, and the semi-auto plus manual drain means you can drain manually or let it purge automatically when pressure drops. This model has no bracket (J) and no gauge (N), so plan for a panel mount and note the 1/8in gauge connection if you add one later.
The standard type (S) covers 0.15-0.9 MPa, and the 40 um element handles general workshop air. The reverse-flow (reflux) valve is fitted as an ordering difference, and the NPT thread uses an MPa/psi gauge scale. If the line needs oil downstream, order the matching GAFC300-08 combination instead. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range, so plan the inlet pressure near the maximum for full output.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
The GAFR300C08SJNTK is a filter and regulator with a 1/4in port, a 60 cc drain bowl, and a weight of 500 g. The pressure range is 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and uses a 40 um element.
The N after the port code means no gauge is supplied, so you cannot read the set pressure without adding one to the 1/8in gauge connection. The J code means the mounting bracket is omitted, so you need a panel mount or an existing bracket to secure the 500 g unit.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.