
The AirTAC GAFR Adjustable Filter Regulator GAFR300C08SJTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C08SJTK is a filter and regulator combined into a single body, eliminating the need for separate GAF and GAR units. It handles 1/4in ports, delivers 0.15-0.9 MPa (20-130 psi), and uses a 40 um element to trap solids.
Its metal bowl holds 60 cc of condensate, and the unit weighs 500 g. The pressed-in self-locking knob resists vibration drift, keeping the outlet pressure stable as supply varies. No lubricator is present; this unit only filters and regulates. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C08SJTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a single actuator or clamping jig on a workbench where stable pressure is critical. The balanced regulator holds the setpoint as shop air fluctuates.
Use on a test bench with 1/4in tubing to supply a consistent 0.15-0.9 MPa to valves or sensors. The 60 cc bowl handles light condensate from compressed air.
Mount on a small panel to filter and regulate air for hand tools or push-in fittings. The 500 g weight suits a rigid frame, not tubing support.
Choose this GAFR300 for 1/4in lines where a compact, 500 g unit with a metal bowl suits the environment. The metal bowl is a build choice; confirm compatibility for aggressive surroundings since the 1.0 MPa max and -5 to 70 C range are identical across bowl materials. This model omits the mounting bracket (J), so plan for a panel mount or existing bracket. It includes a circular gauge with MPa/psi scale, and the semi-auto+manual drain requires periodic attention. The 40 um element is standard; upgrade to 5 um (W) for finer filtration. The reverse-flow valve (K) is fitted as an ordering difference. If oil is needed downstream, order the matching GAFC300-08 combination instead. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the range, so plan supply near 1.0 MPa for maximum output.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
Pressure range is 0.15-0.9 MPa (20-130 psi), max pressure is 1.0 MPa (145 psi), proof pressure is 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 60 cc, and the unit weighs 500 g.
The K indicates a reverse-flow (reflux) valve is fitted. It is an ordering difference; the catalogue does not detail its function in our data. This model also has a metal bowl and omits the bracket.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.