
The AirTAC GAFR Adjustable Filter Regulator GAFR300C08SNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C08SNWT is a filter and regulator combined into a single body, so incoming air is cleaned and then set to a steady outlet pressure without needing separate components. This 1/4in version operates in the 0.15-0.9 MPa (20-130 psi) range and uses a 5 um element to trap fine particles.
Its metal bowl holds 60 cc of condensate, and the unit weighs 500 g, placing it in the mid-size class for shop-floor lines. The diversion structure spins the air to separate liquid water and solids, while the balanced regulator holds the set pressure as supply varies. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C08SNWT |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a bank of precision pneumatic valves that need clean, regulated air at a steady pressure. The 5 um element keeps fine particles from affecting valve seats.
Mount on a machine tool's air line to filter condensate and hold a stable pressure for clamping fixtures or tool changers, with the metal bowl resisting shop-floor impacts.
Use at individual assembly stations where a 1/4in line feeds a single actuator or small jig, keeping the pressure consistent despite upstream fluctuations.
Choose the GAFR300 body when you need a 1/4in port and a 60 cc drain bowl, stepping down from the GAFR400's 100 cc bowl or up from the GAFR200's 25 cc. The metal bowl suits demanding environments, and the 5 um element filters finer than the standard 40 um, though it will need more frequent service. This model ships with the mounting bracket and a semi-auto plus manual drain, so you can drain on a schedule or manually as needed. No gauge is fitted, but the 1/8in gauge connection is ready if you add one later. For lines needing oil downstream, order the matching GAFC300-08 combination instead. The 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan your inlet pressure near 1.0 MPa for full output.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
The GAFR300C08SNWT is a filter and regulator with a 1/4in port, working pressure of 0.15-0.9 MPa (20-130 psi), and a maximum pressure of 1.0 MPa (145 psi). Proof pressure is 1.5 MPa (215 psi), and the temperature range is -5 to 70 C. The metal drain bowl holds 60 cc, and the unit weighs 500 g.
The metal bowl (C code) is a build choice for environments where a transparent bowl might be less desirable. The common specifications, including the 1.0 MPa maximum pressure and -5 to 70 C temperature range, are the same as for PC or nylon bowls. Confirm compatibility for aggressive surroundings, as no chemical or impact data is published.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.