
The AirTAC GAFR Adjustable Filter Regulator GAFR300C08SNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300C08SNWTK is a filter and regulator combined into a single body, so it cleans incoming air and stabilizes outlet pressure without needing separate components. This unit has a 1/4in port, works from 0.15 to 0.9 MPa (20-130 psi), and uses a 5 um element to trap fine particles.
Its metal bowl holds 60 cc of condensate, and the unit weighs 500 g, making it a compact choice for tight machine layouts. The pressed-in self-locking knob resists vibration drift, keeping the set pressure stable during operation. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300C08SNWTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a precision pneumatic valve or a small indexing table with clean, regulated air. The 5 um element protects sensitive internal orifices from fine abrasive dust.
Mount this 500 g unit on a small panel or frame where space is tight. The single-body design reduces the number of joints compared to separate filter and regulator units.
Use it to supply a single work station or a short air line that needs stable pressure. The 60 cc bowl handles typical condensate between manual drain checks.
Choose the GAFR300 body when you need 1/4in ports and a 60 cc drain bowl; step up to the GAFR400 for 3/8in or 1/2in ports with a 100 cc bowl and a flow envelope plotted to 7000 L/min at 0.7 MPa inlet. The metal bowl (C) suits demanding shop-floor environments, while the 5 um element (W) captures finer particles than the standard 40 um, though it will need more frequent service. This model includes the mounting bracket, uses a semi-auto plus manual drain, and has no gauge fitted, so the 1/8in gauge connection is ready for an add-on. The reverse-flow (reflux) valve (K) is fitted as an ordering difference, and the NPT thread matches the MPa/psi gauge scale. If the downstream line needs lubrication, order the matching GAFC300-08 combination instead, since this unit does not add oil. Since the max supply is 1.0 MPa, that leaves about 0.1 MPa above the 0.9 MPa top of the regulated range, so plan the inlet pressure near 1.0 MPa for a 0.9 MPa setpoint.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
The GAFR300C08SNWTK is a filter & regulator with a 1/4in port, working pressure range of 0.15-0.9 MPa (20-130 psi), max pressure of 1.0 MPa (145 psi), and proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The drain bowl holds 60 cc and the unit weighs 500 g. It has a 5 um element, a metal bowl, and a semi-auto plus manual drain.
The K indicates the reverse-flow (reflux) valve is fitted. It is an ordering difference that adds this valve to the unit, but its specific function is detailed in the catalogue page not included in our data. The GAFR300C08SNWTK also has no gauge, so the 1/8in gauge connection is available if you add one later.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.