verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFR300 · Filter & Regulator (Filter + Pressure Regulator, One Body)

Airtac GAFR Adjustable Filter Regulator GAFR300N08ALJWT

The AirTAC GAFR Adjustable Filter Regulator GAFR300N08ALJWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.

  • TypeFilter & regulator
  • Port size1/4"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialNylon
  • Drainautomatic
  • Pressure gaugeCircular, psi / bar
  • Weight500 g
$52.59 $60.09Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAFR300-08 bowl, gauge and thread option on one page All GAFR300-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAFR Adjustable Filter Regulator GAFR300N08ALJWT

The GAFR300N08ALJWT is a filter and pressure regulator combined into a single body, with no lubricator section. It handles a 1/4in port and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi), filtering down to 5 um. The nylon bowl and automatic drain make it a low-maintenance choice for lines that need frequent condensate removal.

The diversion structure spins incoming air to separate liquid water and solid particles into the 60 cc drain bowl. Because the filter and regulator share one housing, this unit replaces a separate GAF filter plus GAR regulator, reducing potential leak points and saving space on the rail. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAFR Adjustable Filter Regulator GAFR300N08ALJWT Technical Specifications

ModelAirtac GAFR Adjustable Filter Regulator GAFR300N08ALJWT
SeriesGAFR300 filter & regulator
Port size1/4" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialNylon
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl60 cc
BracketNot included (J)
Weight500 g

Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.

Model Code: Airtac GAFR Adjustable Filter Regulator GAFR300N08ALJWT

GAFR300GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight.
NBowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N).
08Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2".
ADrain: Automatic drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
JNo bracket (J) — supplied without the mounting bracket.
(blank)Circular pressure gauge fitted.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.

Size Class & Flow Envelope

  • GAFR2001/8"-1/4" · 2000 L/min
  • GAFR3001/4"-1/2" · 3500 L/min
  • GAFR4003/8"-1/2" · 7000 L/min
  • GAFR5003/4" · 8000 L/min
  • GAFR6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFR300 · 1/4" · curve to 3500 L/min
One size downGAFR200
One size upGAFR400 (curve to 7000 L/min)
Add a lubricatorGAFC300-08 (F.R.L. combination)

Where the Airtac GAFR Adjustable Filter Regulator GAFR300N08ALJWT Is Used

precision_manufacturing

Precision valve control

Feed a bank of precision pneumatic valves that require clean, regulated air at a stable lower pressure. The 5 um element protects sensitive internal orifices from fine particulates.

engineering

Bench test rigs

Supply a laboratory or workshop test rig where a consistent 0.15-0.4 MPa output is needed for calibration or component testing. The automatic drain keeps the bowl from filling during long test cycles.

factory

Compact machine stations

Protect a single actuator or small clamping station on a production line. The 500 g body mounts neatly without adding excessive weight, and the self-locking knob holds the set pressure despite machine vibration.

Is the Airtac GAFR Adjustable Filter Regulator GAFR300N08ALJWT the Right Air-Prep Unit?

This GAFR300 model is sized for 1/4in ports and weighs 500 g, placing it in the mid-range class above the GAFR200 (290 g) but below the GAFR400 (880 g). The nylon bowl is a build option that suits environments where a metal bowl is not required, though compatibility for aggressive surroundings should be confirmed. The automatic drain (A) handles condensate without manual intervention, ideal for wet lines or unattended operation. The L-type regulator tops out at 0.4 MPa, so verify your system never needs more than that. This unit ships without a bracket (J), meaning you will need a panel mount or existing support. The 5 um element traps finer particles than the standard 40 um, but will require more frequent servicing. The fitted gauge reads in MPa/psi, matching the NPT thread. If oil is needed downstream, order the matching GAFC300-08 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of the regulated range.

Quick checklist

  • ✓ Body size for your peak flow (1/4" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Bracket kept or removed (J); add a lubricator = GAFC
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
  • check Drain condensate before the 60 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 500 g unit on its bracket, not on the tubing.

This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.

Airtac GAFR Adjustable Filter Regulator GAFR300N08ALJWT FAQ

This filter & regulator has a 1/4in port, a pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C and must not freeze. The drain bowl holds 60 cc and the unit weighs 500 g. It includes a 5 um filter element and an automatic drain.

The L in the code indicates the lower-pressure type, which is designed for applications that only need up to 0.4 MPa (58 psi). The J code means the mounting bracket is not included, so you must provide your own panel mount or use an existing bracket. This is a deliberate choice for installations where the standard bracket is not needed.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR300N08ALJWT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAFR300N08ALJWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.