
The AirTAC GAFR Adjustable Filter Regulator GAFR300N08ALNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR300N08ALNWTK is a filter and regulator combined into a single body, so incoming air is first spun to separate liquid water and solid particles, then regulated to a steady outlet pressure. This unit has no lubricator and only one bowl - the 60 cc condensate bowl that collects what the diversion filter removes.
This model uses a 1/4in port, a 5 um element for finer filtration, and a lower-pressure range of 0.15-0.4 MPa (20-58 psi). The nylon bowl and automatic drain suit installations where regular manual draining is impractical, and the included mounting bracket lets you secure the 500 g body to a panel or frame rather than supporting it from the tubing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300N08ALNWTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR300 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a single precision pneumatic valve or a small instrument air circuit where the 5 um element protects sensitive internals and the lower pressure range prevents over-pressurization.
Mount this 500 g unit on a small assembly machine or test bench where 1/4in ports match the existing piping and the automatic drain reduces maintenance stops.
Use the 0.15-0.4 MPa range for delicate testing or calibration setups that must not exceed 0.4 MPa, with the nylon bowl suited to the build environment.
Choose this GAFR300 when 1/4in ports and a 500 g body match your line, and when the lower-pressure range of 0.15-0.4 MPa (20-58 psi) is sufficient - if the machine may ever need more than 0.4 MPa, select the standard S type instead. The 5 um element traps finer particles than the standard 40 um grade, making it a better fit for precision valves or instrument air, though it will need more frequent service. The automatic drain handles condensate without operator attention, the nylon bowl is a build choice with the same 1.0 MPa max pressure as PC or metal, and the included bracket simplifies mounting. This unit has no gauge fitted, so the 1/8in gauge connection is ready if you add one later, and the NPT thread carries the MPa/psi scale. The reverse-flow (reflux) valve is fitted as an ordering difference. If your line needs lubrication downstream, order the matching GAFC300-08 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of this unit's regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
Working pressure range is 0.15-0.4 MPa (20-58 psi), maximum pressure is 1.0 MPa (145 psi), and proof pressure is 1.5 MPa (215 psi). Temperature range is -5 to 70 C and must not freeze. The drain bowl holds 60 cc, the unit weighs 500 g, and it uses a 5 um filter element.
The L type code limits regulation to 0.15-0.4 MPa (20-58 psi), which suits applications that must never exceed that ceiling. The N after the port means no gauge is supplied; the 1/8in gauge connection is available if you add one later. The automatic drain and nylon bowl are separate options that remain active.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.