
The AirTAC GAFR Adjustable Filter Regulator GAFR300N08ASTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The AirTAC GAFR300N08ASTK combines a filter and a pressure regulator into a single body, saving rail space and reducing potential leak points compared to separate units. It handles 1/4in ports and delivers a standard pressure range of 0.15-0.9 MPa (20-130 psi) with a 40 um filter element.
This model features a nylon bowl and an automatic drain, making it suitable for unattended operation. The balanced regulator mechanism helps maintain a steady outlet pressure as supply varies, while the pressed-in self-locking knob resists drift from vibration. The diversion structure inside spins the air to separate liquid water and solid particles into the 60 cc drain bowl. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300N08ASTK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-08 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/4" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-08 (F.R.L. combination) |
Feed a single precision fixture or a small indexing table with clean, regulated air. The 40 um element protects sensitive valves, and the automatic drain keeps the bowl from filling during long cycles.
Use on a test bench where a stable 0.15-0.9 MPa supply is needed for checking actuators or pilot valves. The self-locking knob holds the setpoint despite bench vibration.
Mount on a dedicated machine station that runs continuously. The 60 cc bowl and automatic drain reduce maintenance stops, while the nylon bowl offers a different build option for the line.
Choose the GAFR300 body for 1/4in or 3/8in port lines, with a flow curve plotted to 3500 L/min at 0.7 MPa inlet. The nylon bowl (N) is a build choice, and the automatic drain (A) suits wet or unattended lines. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The reverse-flow valve (K) is fitted as an ordering difference. If you need lubrication downstream, order the matching GAFC300-08 combination instead. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-08 combination; do not expect an oil mist from this unit.
The GAFR300N08ASTK is a filter & regulator with a 1/4in port. Its pressure range is 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 60 cc drain bowl, and weighs 500 g.
The K code indicates a reverse-flow (reflux) valve is fitted. It is an ordering difference from models without the K code; the catalogue does not detail its function in our data.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.