Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X160-75S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X160-75S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø16mm bore and 160mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ16 mm
- Stroke160 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X160-75S
The MACJ16X160-75S pairs AirTAC's riveted stainless mini body with a wide trim band in the small-bore line: 75 mm of on-site stroke adjustment plus a variable air cushion at both ends. It is double-acting throughout, delivering 100.5 N forward and 86.4 N back at 0.5 MPa, or 140.7 N at 0.7 MPa.
That cushion matters at speed - up to 800 mm/s - because it lets a light 16 mm cylinder stop heavier tooling without hammering the covers. With the magnet built in as standard, CMSG, DMSG and EMSG switches snap on for position feedback. For sizing, treat about 60 N as the usable push, or around 5 kg of vertical lifting with a safety margin.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X160-75S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X160-75S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X160-75S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X160-75S Is Used
Parts-counter kick-off
Fires finished small parts off an assembly counter into a bin, with the cushion keeping the 160 mm kick quiet even at high cycle rates.
Turret stop tuning
Sets stop positions on a rotary small-parts turret; the 75 mm band covers several product sizes from one cylinder, and EMSG switches confirm each stop.
Compact slide extension
Extends a light guide slide on a filling bench, where the stainless round body resists splashes and the 160 mm stroke reaches across the work zone.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X160-75S the Right Cylinder?
If this bore feels light, the next sizes up push 157.0 N (20 mm) and 245.3 N (25 mm) at 0.5 MPa. The stop screw shortens extension only - it will not lengthen travel past 160 mm, nor hold position if air is lost, so support any parked load externally. Choose FA flange or LB foot mounting and I or Y rod knuckles where a floating joint helps. A 75 mm window means you can fixture the cylinder loosely and dial the exact stop later.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X160-75S FAQ
Push is 100.5 N and pull is 86.4 N at 0.5 MPa; at 0.7 MPa expect 140.7 N push and 120.9 N pull, with a theoretical maximum of 20.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) and proof pressure is 1.5 MPa (215 psi).
Its barrel is stainless steel and the 6 mm rod is hard-chrome plated to 20 um, while the aluminium covers are rolled on with a sealed stainless block - a build that resists mild corrosion in damp food or outdoor spots far better than painted-steel minis.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X160-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.