Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X175-10S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X175-10S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø16mm bore and 175mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ16 mm
- Stroke175 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X175-10S
A 16 mm bore MACJ with a 175 mm stroke and a 10 mm extend-trim window: the stop screw shortens the out-stroke on site anywhere inside that 10 mm band, and a variable air cushion at each end takes the sting out of end-of-stroke impact. Output is modest but real - 100.5 N of push at 0.5 MPa (140.7 N at 0.7 MPa) with 86.4 N on retract. Keep working loads near 60 N and the cylinder will still lift a 5 kg part vertically with a 2:1 margin.
Its stainless round barrel and 20 um hard-chrome rod handle washdown and humid air better than painted minis, while the rolled aluminium covers keep the body sealed for life. The magnet is fitted as standard, so CMSG, DMSG or EMSG switches snap on without any special-order piston.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X175-10S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X175-10S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X175-10S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X175-10S Is Used
Phial indexing on a benchtop filler
Indexing glass vials one station at a time on a small pharmaceutical filling rig, where the 10 mm trim dials in exact station spacing and the 5 kg-class lift margin covers lightweight carriers.
Carton flap tuck station
Tucking side flaps on small cosmetic cartons at up to 800 mm/s, with the dual cushion stopping the 100.5 N push from cracking the board at end of stroke.
Microplate shuttle
Sliding a microplate between two lab assay positions over 175 mm; the stainless round body shrugs off repeated bench wipe-downs where painted minis would pit.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X175-10S the Right Cylinder?
Output: 100.5 N push and 86.4 N pull at 0.5 MPa, rising to 140.7 N and 120.9 N at 0.7 MPa. If that is short, the 20 mm bore delivers 157 N at the same pressure; there is nothing smaller than 16 mm in this family. Remember the adjuster is purely an extend-side end stop - on air loss the rod still drifts, so do not count on it to hold a load. Ports are M5x0.8; pick FA flange, LB foot or an I / Y rod knuckle, and trim travel between 30 and 800 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X175-10S FAQ
At 0.5 MPa it pushes 100.5 N and pulls 86.4 N; at 0.7 MPa those rise to 140.7 N and 120.9 N, with a theoretical peak of 20.5 kgf at 1.0 MPa. Bore is 16 mm with a 6 mm rod, the port is M5x0.8 and the rod thread M6x1.0. The extend stroke trims within a 10 mm window, operating pressure spans 0.15-1.0 MPa (22-145 psi), and speed runs 30-800 mm/s.
Yes - every MACJ carries a built-in magnet as standard equipment, so CMSG, DMSG or EMSG switches mount directly on the barrel for end-of-stroke or mid-travel detection with no special-order piston required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X175-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.