Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-10S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-10S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-10S
Fine positioning in 10 mm steps is the job of the MACJ16X200-10S, a double-acting AirTAC mini cylinder with adjustable stroke and a variable air cushion at each end. Its rolling-packed body - stainless barrel, aluminium covers, chrome-plated 6 mm rod - is riveted into one sealed unit that stays tight in vibration-heavy frames.
Force output sits at 100.5 N push and 86.4 N pull on 0.5 MPa air, rising to 140.7 N and 120.9 N at 0.7 MPa; the 20.5 kgf theoretical figure is a stress-case number, not a working one. Budget near 60 N for real work, or expect about 5 kg of vertical lift with a 2:1 margin. A grease-storing two-way piston seal keeps the seal lips lubricated across the whole 200 mm stroke, and the built-in magnet feeds CMSG / DMSG / EMSG switches as standard.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-10S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-10S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-10S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-10S Is Used
Lab dosing head registration
Register a micro-dosing nozzle above a sample tray and creep it in 10 mm increments until the dispense height is exact, with cushions giving a gentle settle at both ends.
PCB test fixture clamp
Press a spring-loaded probe block onto PCB test points with about 60 N of controlled force, trimming the engage depth on the fixture instead of remachining it.
Belt tracker adjustment
Nudge a tracking roller on a narrow conveyor to re-center the belt; the standard magnet and a DMSG switch confirm the set position every cycle.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-10S the Right Cylinder?
If 10 mm of trim feels too coarse, note this is already the smallest bore AirTAC makes in the MA range; going larger, a 20 mm bore lifts output to 157.0 N push and 131.9 N pull at 0.5 MPa, and a 25 mm bore to 245.3 N and 206.1 N.
Mount on the FA flange or LB foot and guide the load externally, because the 6 mm rod on a 200 mm stroke will bend under side load. The stop screw is a position setter for the extend stroke, not a brake - on air loss the piston still drifts, so add a locking valve if the load must stay put.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-10S FAQ
0.5 MPa gives 100.5 N push and 86.4 N pull; 0.7 MPa gives 140.7 N push and 120.9 N pull; theoretical maximum is 20.5 kgf at 1.0 MPa. Speed range is 30-800 mm/s at 0.15-1.0 MPa (22-145 psi).
A high-precision stainless-steel tube with aluminium-alloy covers rolled and riveted onto it. The carbon-steel rod carries a 20 um hard-chrome plating, and the heterogeneous piston seal stores its own grease film, which suits damp or lightly washed environments.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.