Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-30S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-30S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-30S
AirTAC built the MACJ16X200-30S around a riveted stainless round barrel with a hard-chrome plated 6 mm rod - construction that tolerates outdoor humidity and light washdown far better than painted mini cylinders. Function is double-acting with an adjustable extend stroke (30 mm window) and a variable air cushion at both ends.
On 0.5 MPa supply the 16 mm bore develops 100.5 N push and 86.4 N pull, climbing to 140.7 N and 120.9 N at 0.7 MPa with a 20.5 kgf theoretical peak. That translates to roughly 60 N of dependable working force, or a vertical lift of about 5 kg when you keep a 2:1 margin. The magnet comes standard, so bracket a CMSG, DMSG or EMSG switch straight onto the M5x0.8-ported body and start sensing on day one.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-30S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-30S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-30S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-30S Is Used
Pallet-detect flag on racking
Extend a detection flag across a narrow racking aisle to confirm pallet presence; the standard magnet and an EMSG switch report position back to the WMS.
Chute diverter on a roaster line
Push a small diverter blade between two coffee-chute paths with 100.5 N of push, trimming blade travel inside the 30 mm window to match chute depth.
Rotary table lock pin
Drive a lock pin into an indexing dial on a compact rotary table; the cushion damps pin seating and a CMSG switch confirms full lockout before the cycle starts.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-30S the Right Cylinder?
For heavier clamping, the next bore up is 20 mm at 157.0 N push and 131.9 N pull, and 25 mm reaches 245.3 N and 206.1 N at 0.5 MPa - size from the 60 N working figure, not the 100.5 N peak, for long seal and rod life.
Pick the LB foot for inline frames or the FA flange for face mounting; I and Y rod knuckles cover swinging links. Because the 30 mm adjuster is a mechanical end stop only, pair it with a check or locking valve where the load must not sink on air failure. With a 200 mm stroke on a 6 mm rod, keep side loads on a separate guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-30S FAQ
No - every MA-series cylinder ships with the magnet built in, so CMSG, DMSG and EMSG switches mount directly on the stainless barrel for end-of-stroke or in-window position signals.
Push 100.5 N and pull 86.4 N at 0.5 MPa; push 140.7 N and pull 120.9 N at 0.7 MPa; 20.5 kgf theoretical maximum. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), temperature -20 to +70 C, speed 30-800 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.