Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-75S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-75S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-75S
With a 75 mm trim window, the MACJ16X200-75S covers more than a third of its 200 mm stroke as on-site adjustment - set the extend stop once, dial it again when the product changes. This double-acting mini cylinder carries a variable air cushion at both ends and makes 100.5 N of push and 86.4 N of pull at 0.5 MPa.
Construction is a riveted stainless round barrel with a hard-chrome plated rod, so mild corrosion and rinse-down are non-events. Size the job to about 60 N of usable push at 0.5 MPa, which in lifting terms is roughly 5 kg vertical once you keep a margin. CMSG, DMSG or EMSG switches mount directly because the magnet comes built in.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-75S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-75S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-75S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-75S Is Used
Bottle cap press
Pressing caps onto 30 ml dropper bottles, where the 75 mm window spans cap heights and cushioned stops avoid cracking the glass.
Chute diverter
Flipping a gravity chute between two lanes on a bakery line; 100 N at 0.5 MPa is plenty for the lightweight gate.
PCB test fixture
Lowering a probe carriage onto PCBs, with a DMSG switch on the standard magnet confirming the trimmed home position.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-75S the Right Cylinder?
Compared side by side, the next bore up, 20 mm, delivers 157 N at 0.5 MPa - choose it when the 16 mm bore runs out of force. Note the stop screw shortens the extend stroke only; it will not hold a load against air loss. Pick FA (flange) or LB (foot) plus I or Y rod knuckles, and on this longer 200 mm stroke avoid side loads on the 6 mm rod by guiding the load externally.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-75S FAQ
Push at 0.5 MPa is 100.5 N, pull at 0.5 MPa is 86.4 N, and push at 0.7 MPa reaches 140.7 N; theoretical maximum force is 20.5 kgf at 1.0 MPa. The adjustable extend window is 75 mm, cushioning is variable at both ends, and speed runs 30-800 mm/s on air at 0.15-1.0 MPa (22-145 psi).
Yes. The magnet is built into every MACJ piston as standard, so a CMSG, DMSG or EMSG reed or electronic switch drops onto the barrel whenever you need end-of-stroke or trimmed-position signals - no special piston, no retrofit machining.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X200-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.