Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X225-75S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X225-75S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø16mm bore and 225mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ16 mm
- Stroke225 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X225-75S
Trim the extend stroke anywhere within a 75 mm window and this 16 mm bore MA-series mini still lands cushioned at both ends. Double-acting throughout, it produces 100.5 N forward and 86.4 N back at 0.5 MPa, climbing to 140.7 N at 0.7 MPa with a 20.5 kgf ceiling.
Construction is a rolled stainless tube with a hard-chrome plated 6 mm rod and riveted aluminium covers - no tie-rod bolts to check, and it shrugs off condensation that corrodes painted bodies. Speed spans 30-800 mm/s across 0.15-1.0 MPa (22-145 psi). Figure on about 60 N of useful force at 0.5 MPa, which corresponds to hoisting roughly 10 kg - or 5 kg if you keep a 2:1 margin.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X225-75S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X225-75S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 225 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X225-75S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X225-75S Is Used
Web-guide corrector on a printing line
Corrects web drift across 225 mm of travel; the wide 75 mm window lets operators re-center the guide without re-piping the circuit.
Dosing pump stroke setter
Sets dispense volume by trimming extension up to 75 mm; the variable cushion stops the plunger crashing at stroke end.
Guard-door latch on a CNC enclosure
Drives a sliding latch across the full 225 mm span; end cushions keep the latch from banging home at high cycle rates.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X225-75S the Right Cylinder?
If loads grow, bore 20 (157.0 N push at 0.5 MPa) or bore 25 (245.3 N) are the next steps in the same series. The 225 mm stroke is standard for this bore, yet at that length a 6 mm rod will buckle under lateral loads, so route side forces into external guides and fix the body with the FA flange or LB foot. Keep in mind the 75 mm adjuster only shortens extension and does not lock the piston when pressure drops.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X225-75S FAQ
At 0.5 MPa the extend stroke delivers 100.5 N and the retract 86.4 N; raise to 0.7 MPa for 140.7 N push and 120.9 N pull. Peak theoretical force is 20.5 kgf at 1.0 MPa. The 225 mm stroke carries a 75 mm adjustable window, a variable cushion at each end, and runs 30-800 mm/s on 0.15-1.0 MPa (22-145 psi) air.
The barrel is stainless steel rolled directly onto aluminium covers, and the 6 mm rod is hard-chrome plated to about 20 um, so splashes, condensation and mild washdown are non-issues. AirTAC ships the magnet as standard, letting CMSG / DMSG / EMSG switches bolt on for end-of-stroke signals.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X225-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.