Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-10S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-10S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø16mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-10S
Where only a small final adjustment matters, the 10 mm window on this 60 mm stroke cylinder does the job with minimal lost travel. It stays double-acting with variable cushions at each end, and the 16 mm bore produces 100.5 N push against 86.4 N pull at 0.5 MPa - up to 140.7 N when supply reaches 0.7 MPa. Working band is 0.15-1.0 MPa (22-145 psi) at 30-800 mm/s.
The round stainless barrel rivets to aluminium covers for a sealed, washdown-friendly shell, and the 6 mm rod is hard-chrome plated to 20 um for smooth seal running. Every unit carries its piston magnet from the factory, so CMSG / DMSG / EMSG sensing costs no option surcharge. Derate for real work: about 60 N of push at 0.5 MPa, enough to raise some 5 kg on a vertical axis while holding half the rating in reserve.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-10S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-10S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-10S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-10S Is Used
Label hold-down on a shrink tunnel
60 mm of reach presses labels flat while the 10 mm window compensates for carton height drift without touching the bracket.
Tray present-and-return in an electronics loader
100.5 N push at 0.5 MPa slides PCB trays into a nest, and the built-in magnet with a CMSG switch verifies full seat each cycle.
Cabinet latch actuation in outdoor kiosks
Stainless construction handles condensation inside unheated enclosures where painted bodies rust, cycling latches all day at low force.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-10S the Right Cylinder?
At 16 mm this is the lightest MACJ; the next steps are bore 20 at 157.0 N and bore 25 at 245.3 N push, both at 0.5 MPa. With 60 mm of travel the rod is still short, but keep side loads off it anyway - use I or Y knuckles where the tool must swivel. The 10 mm adjuster shortens extension only and will not lock the rod against drift when air fails; choose FA flange or LB foot mounting and PT (blank), G or NPT ports.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-10S FAQ
Yes: 16 mm bore, 6 mm rod, M5x0.8 ports, 60 mm stroke with a 10 mm extend-trim window. Forces are 100.5 N push / 86.4 N pull at 0.5 MPa and 140.7 N push / 120.9 N pull at 0.7 MPa, peaking at 20.5 kgf theoretical at 1.0 MPa. Pressure 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, double-acting with two-way cushioning.
No. The stop screw simply limits how far the rod extends, so with 60 mm of base travel it sets the end point only - it is not a mid-stroke lock or brake. If supply fails the piston drifts freely, so for suspended loads add a locking valve or a separate mechanical catch.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.