Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-75S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-75S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø16mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-75S
With a 75 mm trim window on a 60 mm stroke, this MACJ lets maintenance teams dial the extend position on the machine instead of swapping cylinders. The external stop screw shortens the extend stroke within the ordered window, and a variable air cushion at each end absorbs end-of-travel shock. Double-acting and 16 mm bore, it delivers 100.5 N push and 86.4 N pull at 0.5 MPa on a 0.15-1.0 MPa (22-145 psi) air supply.
The riveted stainless round barrel and hard-chrome plated rod shrug off washdown mist where painted minis rust, a real edge in food and packaging plants. A magnet is built in as standard, so CMSG, DMSG or EMSG switches drop straight on without a special piston. Plan on roughly 60 N of usable force at 0.5 MPa rather than the full 100.5 N - about 5 kg of vertical lift with a 2:1 margin.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-75S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-75S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-75S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-75S Is Used
Bottle-gate actuator
Swinging a guide gate on a beverage filler line, where the 75 mm window lets line staff trim the gate position without swapping cylinders.
Small-part ejection
Knocking finished connector housings out of an assembly nest, with the variable cushion damping the knock at both ends of the 60 mm travel.
Presence verification
Pressing a sensor flag into a fixture on a PCB test bench; the built-in magnet feeds position feedback to a CMSG switch.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-75S the Right Cylinder?
At 16 mm this is the smallest bore in the MA family, so upsize only if the load grows: a 20 mm bore pushes 157.0 N and a 25 mm bore 245.3 N at 0.5 MPa. Keep in mind the adjuster is a mechanical end stop for the extend stroke - it will not clamp or hold the rod if air pressure drops. Mount with the FA flange or LB foot, add I or Y rod knuckles if the load pivots, and pair the standard magnet with a CMSG switch for end-of-stroke signals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-75S FAQ
At 0.5 MPa it pushes 100.5 N and pulls 86.4 N; at 0.7 MPa, 140.7 N push and 120.9 N pull. The theoretical maximum at 1.0 MPa is 20.5 kgf. The rod is 6 mm with an M6x1.0 male thread and the port is M5x0.8. Supply air between 0.15-1.0 MPa (22-145 psi) and run at 30-800 mm/s.
Every MACJ ships with the piston magnet built in as standard, so CMSG, DMSG or EMSG switches mount without a special-order piston. The stainless barrel and chrome-plated 6 mm rod also tolerate washdown and condensation far better than painted minis.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X60-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.