Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X75-10S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X75-10S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X75-10S
Tight tolerance is the story here: a 10 mm window lets you fine-trim the 75 mm extend stroke with the external stop screw, useful when a fixture position is settled but needs a millimetre or two of final adjustment. It is double-acting with a variable cushion at both ends, rated 100.5 N push and 86.4 N pull at 0.5 MPa across a 0.15-1.0 MPa (22-145 psi) supply.
Construction follows the MA pattern - a riveted stainless round barrel, aluminium covers and a hard-chrome plated 6 mm rod that resists corrosion in damp or lightly washed corners of the plant. The magnet comes built in; CMSG, DMSG and EMSG switches bolt on as needed. For sizing, treat about 60 N as your working push at 0.5 MPa, which supports roughly 5 kg of vertical lift with a 2:1 margin.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X75-10S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X75-10S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X75-10S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X75-10S Is Used
Fixture fine-positioning
Setting an exact clamp pad position on a machining fixture, where the 10 mm window covers final tweak without a cylinder change.
Go/no-go gauging station
Advancing a part into a gauging cradle on a quality bench with a repeatable, cushioned 75 mm approach every cycle.
Light part lift
Raising small aluminium fittings between pallet trays - about 5 kg, comfortably inside the halved vertical-lift margin for this bore.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X75-10S the Right Cylinder?
If 100.5 N at 0.5 MPa leaves no headroom, step up to the 20 mm bore (157.0 N push) or 25 mm bore (245.3 N) in the same family. The 75 mm stroke is well inside the 300 mm standard limit for bore 16, so no made-to-order barrel is involved. Choose FA flange or LB foot mounting, fit I or Y knuckles where the load swivels, and remember the stop screw only sets the extend end position - it cannot lock the rod against drift when air is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X75-10S FAQ
Push is 100.5 N and pull 86.4 N at 0.5 MPa; at 0.7 MPa expect 140.7 N push and 120.9 N pull. Theoretical peak at 1.0 MPa is 20.5 kgf. Bore is 16 mm with a 6 mm rod (M6x1.0 thread) and M5x0.8 port; air supply 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s.
The variable air cushion is adjustable at both ends, and the -10 stop screw trims the extend stroke across a 10 mm window. The adjuster sets position only; on air loss the piston drifts freely, so do not rely on it as a brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X75-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.