Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X80-10S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X80-10S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø16mm bore and 80mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ16 mm
- Stroke80 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X80-10S
A compact double-acting mini cylinder with an adjustable extend stroke: a 10 mm trim window lets you shorten the 80 mm stroke on site with a stop screw, and a variable air cushion at both ends soaks up end-of-stroke shock. At 0.5 MPa it pushes with 100.5 N and pulls with 86.4 N, enough for light clamping and ejecting in tight machines. The round stainless barrel and hard-chrome plated 6 mm rod shrug off washdown and damp shop air better than painted-steel minis.
Because it lifts about 5 kg vertically with a 2:1 margin (100.5 N at 0.5 MPa works out near 10 kg theoretical), it suits battery caps, small brackets and sensor targets. Air range is 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, and the built-in magnet is standard, so CMSG, DMSG or EMSG switches click on without a special piston. The adjuster is a mechanical end stop, not a mid-stroke lock - the rod still drifts if air is lost.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X80-10S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X80-10S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 80 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X80-10S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X80-10S Is Used
Injection mold ejector
Kicks small molded caps or sprue pins off a mold face, with the 10 mm window set so the ejector clears the part without bottoming.
Light part kicker
Swings tiny brackets off a conveyor lane at up to 800 mm/s; the cushion softens every hit so the striker does not chip painted parts.
Lab sample press
Presses vial septa or coverslips home with about 60 N of working force, trimmed exactly to the sample height inside the 10 mm range.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X80-10S the Right Cylinder?
This is the smallest bore in the range, so check upward before settling: bore 20 pushes 157.0 N at 0.5 MPa and bore 25 reaches 245.3 N if your clamp needs more than the roughly 60 N this cylinder should really be asked to do. Choose FA flange or LB foot mounting, with I or Y rod knuckles for pivoting loads. The stop screw shortens the extend stroke only - on air loss the rod can drift, so do not use it to hold a position.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X80-10S FAQ
At 0.5 MPa it pushes 100.5 N and pulls 86.4 N; at 0.7 MPa, 140.7 N push and 120.9 N pull. Theoretical maximum at 1.0 MPa is 20.5 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-800 mm/s, air port M5x0.8.
Yes - every MA-series cylinder ships with the piston magnet already fitted, so CMSG, DMSG or EMSG switches clip onto the barrel for end-of-stroke signalling without any special-order piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ16X80-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.