Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X60-10S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X60-10S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø25mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ25 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X60-10S
Sixty millimetres of travel with a 10 mm fine-trim window makes the MACJ25X60-10S the pick when the approach must be long but the landing point critical: the external stop screw shortens the extend stroke by up to 10 mm on site. Double-acting with a variable air cushion at both ends, it runs 30-800 mm/s and delivers 245.3 N push and 206.1 N pull at 0.5 MPa (343.4 N push at 0.7 MPa).
Its stainless round barrel and hard-chrome plated rod take humidity and washdown in stride, a genuine step up from painted minis in food plants or outdoors. The magnet is included as standard, so CMSG, DMSG and EMSG switches attach without special ordering. For vertical work, the 245.3 N figure equals about 25 kgf at 0.5 MPa; with a 2:1 margin that means lifting roughly 12.5 kg.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X60-10S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X60-10S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X60-10S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X60-10S Is Used
Label press-on head
Seats labels onto jars on a semi-auto line; the 10 mm trim sets press depth per label stock, and 245.3 N at 0.5 MPa applies labels without wrinkles.
Wire harness terminal press
Presses terminals into connector housings; the 60 mm approach clears the fixture, then the fine trim sets exact insertion depth for crimp quality.
Tray index stop at a scan point
Stops arriving trays on a pharma conveyor for barcode scanning; a DMSG switch signals tray-present, and the end cushion keeps the stop quiet.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X60-10S the Right Cylinder?
If 245.3 N at 0.5 MPa overshoots your task, bore 20 gives 157.0 N; if you are close to the limit, bore 32 provides 402.2 N. The 60 mm stroke is well inside the 300 mm standard limit for this bore, so it ships as a catalogue item. One caution: the trim screw is a mechanical stop for the extend stroke, never a load brake - on air loss the rod can still be pushed back. Bolt it down with an FA flange or LB foot and use I or Y knuckles where the load pivots.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X60-10S FAQ
At 0.5 MPa: 245.3 N push, 206.1 N pull. At 0.7 MPa: 343.4 N push, 288.5 N pull. Theoretical maximum force is 50 kgf at 1.0 MPa. Pressure range 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-800 mm/s, rod 10 mm, port 1/8".
It is the adjustable-stroke window: an external stop screw shortens the 60 mm extend stroke by up to 10 mm so you can set the landing point on site. It trims the stroke only - it cannot lengthen past 60 mm - and it works as an end stop, not a mid-stroke load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.