Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X75-10S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X75-10S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ25 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X75-10S
Fine tuning is the whole point here: MACJ25X75-10S trims the extend stroke within a narrow 10 mm window, ideal for taking up tolerance stack without shimming the mount. It stays double-acting with a variable cushion at each end, running 0.15-1.0 MPa (22-145 psi) at 30-800 mm/s.
Underneath, a stainless round barrel is rolled tight against aluminium covers, and the carbon-steel rod wears 20 um of hard chrome - splash, humidity and outdoor duty will not blister it like paint. The 25 mm bore turns 0.5 MPa into 245.3 N push and 206.1 N pull, reaching 343.4 N push at 0.7 MPa and 50 kgf theoretically. Plan around 147 N of usable push, or about 12 kg of vertical lift at a 2:1 factor.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X75-10S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X75-10S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X75-10S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X75-10S Is Used
Index stop under a vision camera
Dial the stop back a few millimetres so PCBs park dead-centre in the camera field; the 10 mm window matches fine fixture tolerances.
Badge embossing press
245.3 N push at 0.5 MPa suits card and badge marking; cushions soften contact so the die does not bounce.
Gripper dock on a SCARA pick cell
Re-trim docking depth per end-effector without moving the cylinder; dual cushions protect the dock at full cycle speed.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X75-10S the Right Cylinder?
A 16 mm bore manages 100.5 N push at 0.5 MPa; the next size up, 32 mm, reaches 402.2 N - this one covers the middle ground with 245.3 N. The stop screw only shortens extend travel and will not hold a load when air is lost, so add an external stop or locking valve for suspended loads. Mount by FA flange or LB foot, fit I or Y knuckles where the linkage pivots, and the standard-built magnet pairs directly with CMSG, DMSG and EMSG switches. Ports are 1/8" and the rod thread M10x1.25.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X75-10S FAQ
Push 245.3 N and pull 206.1 N at 0.5 MPa; push 343.4 N and pull 288.5 N at 0.7 MPa; 50 kgf theoretical peak at 1.0 MPa. Media is 40 um filtered air, 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s.
The barrel is stainless steel and the rod is hard-chrome plated carbon steel, so mild corrosion and routine hose-down are handled far better than by painted-steel minis. Ports are 1/8"; the rod thread is M10x1.25.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ25X75-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.