Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X10-10S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X10-10S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X10-10S
Short travel, full control: the MACJ32X10-10S is a double-acting round-body mini cylinder with a 10 mm extend stroke and a stop screw that trims it anywhere inside a 10 mm window. A variable air cushion at each end absorbs end-of-stroke shock, and the riveted stainless barrel with its hard-chrome plated 12 mm rod stands up to washdown and damp air far better than painted minis. At 0.5 MPa the 32 mm bore pushes 402.2 N, so roughly 241 N of that is a realistic working figure once you allow a margin.
A magnet comes built in as standard, so CMSG, DMSG or EMSG switches clip on for position signals with no special piston order. Air supply runs 0.15-1.0 MPa (22-145 psi), speed spans 30-800 mm/s, ports are 1/8 in and the male rod thread is M10x1.25. FA flange and LB foot mountings, plus I and Y rod knuckles, cover most fixture layouts.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X10-10S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X10-10S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X10-10S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X10-10S Is Used
Die ejection pop
Ejects a pressed bushing out of a small assembly die with a short, cushioned 10 mm strike.
Nip roller gap setting
Sets the exact roller clearance on a labeling machine nip, trimmed on site via the stop screw.
Fixture detent indexing
Drives a detent pin on a machining fixture where travel is only a few millimetres.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X10-10S the Right Cylinder?
If 402.2 N at 0.5 MPa is more than the job needs, bore 25 gives 245.3 N in a slimmer body; if loads grow, bore 40 reaches 628.3 N. For the 10 mm trim, verify the stop-screw position under real load before locking it - the adjuster is a mechanical end stop, not a mid-stroke lock, so on air loss the piston still drifts. Keep the MA family in mind too: MAC is the fixed-stroke cushioned twin and MACD adds a second rod. The standard magnet means this unit is sensor-ready out of the box.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X10-10S FAQ
At 0.5 MPa: 402.2 N push and 345.6 N pull. At 0.7 MPa: 563.0 N push and 483.8 N pull. Theoretical peak is 82 kgf at 1.0 MPa. Ports are 1/8 in, the rod thread is M10x1.25, and the rod is 12 mm.
Yes. Every MA-series cylinder ships with a built-in magnet, so AirTAC CMSG, DMSG and EMSG switches mount directly on the barrel without ordering a magnet-equipped piston as an extra.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X10-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.