Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X110-30S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X110-30S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X110-30S
A stainless round barrel rolled tight against aluminium covers gives the MACJ32X110-30S a riveted body that shrugs off washdown far better than painted mini cylinders. This bore pushes 402.2 N at 0.5 MPa, so plan on roughly 241 N of dependable working force or about 20 kg of vertical lift with a 2:1 margin. The extend stroke is trimmed on site by an external stop screw anywhere in the 30 mm window, and a variable air cushion at both ends soaks up end-of-stroke shock across the 30-800 mm/s speed range.
Every MA-series cylinder carries the position magnet as standard, so CMSG, DMSG or EMSG switches clip on without a special piston. The hard-chrome plated 12 mm rod keeps wear low, operating pressure spans 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof, and air filtered to 40 um protects the grease-storing piston seal.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X110-30S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X110-30S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X110-30S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X110-30S Is Used
Fill-height trim on a bottling line
Set the reject gate to 110 mm, then dial the last 30 mm in from the stop screw as bottle formats change - no re-plumbing, and the cushion keeps glass bottles from chipping.
Die ejection on a small press
402 N at 0.5 MPa clears trimmed parts from a punch die each cycle; the stainless barrel survives coolant mist around the press bed.
Product diverter on a conveyor
Pushes cartons between lanes over 110 mm; the built-in magnet and a CMSG switch confirm the diverter has fully retracted before the next case arrives.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X110-30S the Right Cylinder?
For pure push at 0.5 MPa, bore 32 delivers 402.2 N; drop to a bore 25 MACJ (245.3 N) for lighter gates or step up to a bore 40 (628.3 N) once fixtures gain weight. Keep in mind the stop screw only fixes the extend position - if air is lost the rod still drifts, so it is no replacement for a load-holding valve. Mount on the FA flange or LB foot, fit I or Y rod knuckles where the load pivots, and shield the 12 mm rod from side loads on this 110 mm travel.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X110-30S FAQ
At 0.5 MPa it pushes 402.2 N and pulls 345.6 N; at 0.7 MPa those rise to 563.0 N push and 483.8 N pull. The theoretical ceiling is 82 kgf at 1.0 MPa. Speed is adjustable from 30-800 mm/s and pressure runs 0.15-1.0 MPa (22-145 psi).
The stainless barrel and 20 um hard-chrome rod resist corrosion in damp, food or outdoor spots where paint flakes off. The variable cushion at both ends and the standard built-in magnet for CMSG / DMSG / EMSG switches come as standard, not extras.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X110-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.