Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X15-10S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X15-10S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø32mm bore and 15mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke15 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X15-10S
Fifteen millimetres of stroke, ten of it trimmable, and 402 N of push at 0.5 MPa - the MACJ32X15-10S packs the 32 mm MA bore into a short round stainless body for punch, kick and eject actions. It is double-acting with a variable cushion at each end, runs on 0.15-1.0 MPa (22-145 psi), and cycles anywhere from 30-800 mm/s.
The rolling-packed aluminium covers and stainless tube seal out moisture that would blister a painted mini cylinder, and the hard-chrome 12 mm rod keeps sliding smooth through coolant spray. Load at 60 percent and you still command about 241 N of working push - enough to lift roughly 20 kg vertically at a 2:1 margin, or to snap small parts out of a nest in a single hit. The magnet is standard, so CMSG, DMSG or EMSG switches read end positions without modification.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X15-10S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X15-10S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X15-10S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X15-10S Is Used
Vial kicker on a lab filling line
Pushing filled vials out of the filler starwheel into a tray; the 15 mm travel matches the vial pitch exactly.
Part ejector under an electronics press
Popping finished connectors out of a pogo-pin nest after crimp; 402 N clears stuck parts without marking them.
Confirm pin on a small rotary indexer
Dropping into an index hole to verify station position; the 10 mm window lets each station tune its own dwell depth.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X15-10S the Right Cylinder?
Compare bores before you commit: the 25 mm MA pushes 245 N at 0.5 MPa and saves space, while the 40 mm version jumps to 628 N for heavier nests. The 10 mm stop-screw window covers most of this short stroke, so the extend position can be parked almost anywhere - but treat it as a travel limit, never as a lock that holds the rod against back-driving when air drops. Bolt the body down with an LB foot or FA flange, feed both chambers through the 1/8" port, and use I or Y knuckles for angled loads. Short strokes rarely bend rods, yet an off-centre ejector still deserves its own guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X15-10S FAQ
Push is 402 N and pull 346 N at 0.5 MPa; at 0.7 MPa it is 563 N push and 484 N pull; the theoretical top at 1.0 MPa is 82 kgf. Run it on 0.15-1.0 MPa (22-145 psi) filtered air at 30-800 mm/s.
It lets maintenance trim the extend stroke down to nearly nothing to match part sizes, tooling wear or new nests without swapping cylinders or re-piping. The screw is an end stop only - it sets where extension halts, it does not clamp the piston in place, and the dual air cushions keep even full-speed 15 mm hits quiet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X15-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.