Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X160-75S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X160-75S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø32mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X160-75S
The 75 mm trim window on this MACJ32X160-75S means one unit can serve several fixture depths - trim it down from the full 160 mm with a screwdriver instead of stocking three fixed-stroke cylinders. Double-acting with variable cushions at each end, it runs 0.15-1.0 MPa (22-145 psi) and 30-800 mm/s, reaching 402 N push at 0.5 MPa.
AirTAC builds it as a round-body mini: stainless barrel rolled against aluminium-alloy covers, a 12 mm rod hard-chrome plated to 20 um, and the magnet already fitted for CMSG, DMSG and EMSG switches. For sizing, count on about 241 N of usable push at 0.5 MPa once a healthy margin is kept - that suits clamps, diverters and light presses alike.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X160-75S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X160-75S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X160-75S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X160-75S Is Used
Sorting diverter
Kicks parcels between conveyor lanes on a sortation line; the wide 75 mm window lets maintenance re-tune throw length per lane without changing cylinders.
Multi-depth fixture clamp
One clamp model now serves several jigs on a machining fixture, with the trim window set per jig and the air cushions damping each clamping move.
Carton squaring pusher
Pushes cartons square before strapping at a palletizing cell, where cushion tuning prevents carton bounce even at full line speed.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X160-75S the Right Cylinder?
A bore-25 MA pushes 245 N at 0.5 MPa, leaving about 147 N of practical work - light duty; if 402 N feels short, bore 40 gives 628 N in the same family. The stop screw trims extend only and will not hold a load against air loss, so add a valve or external stop where position must persist. Choose FA flange or LB foot for the body and I or Y knuckle for the rod end, and on a 160 mm stroke mind side load against the 12 mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X160-75S FAQ
Push is 402 N and pull 346 N at 0.5 MPa; at 0.7 MPa expect 563 N push and 484 N pull; theoretical maximum 82 kgf at 1.0 MPa. It accepts 0.15-1.0 MPa (22-145 psi), runs 30-800 mm/s, and breathes through a 1/8 inch port.
Yes - every MACJ ships with the piston magnet as standard, so CMSG, DMSG and EMSG switches clip straight onto the 32 mm barrel with no special-order piston. Combined with the adjustable stroke, you get both a tunable stop position and electrical end detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X160-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.