Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X35-10S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X35-10S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø32mm bore and 35mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X35-10S
Tight on space and precise on position, this 35 mm-stroke mini keeps a 10 mm window for fine trim of the extend stop. The MACJ32X35-10S runs double-acting with a variable air cushion at each end; its 32 mm bore generates 402 N extending at 0.5 MPa and 563 N at 0.7 MPa, on supplies of 0.15-1.0 MPa (22-145 psi) at 30-800 mm/s.
Build quality follows the classic AirTAC MA recipe: barrel and block in stainless steel rolled tight against aluminium covers, with the carbon-steel piston rod hard-chrome plated to about 20 um for wear and rust resistance in damp shops. For load matching, the 402 N extend force equates to about 41 kg of vertical lift; keep the actual lifted mass near 20 kg and a solid 2:1 margin is yours. The standard-fit magnet means CMSG / DMSG / EMSG switches attach with no special-order piston.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X35-10S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X35-10S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X35-10S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X35-10S Is Used
CNC fixture clamp
Clamps a machined blank against a stop on a CNC fixture; the 35 mm stroke clears chip room and 402 N at 0.5 MPa holds the part firm.
Small-part kicker
Diverts 40 mm fittings off a gravity rail into a bin; the 10 mm trim lets a technician fine-tune the rest position to stop part bounce.
Dowel pin press
Presses dowel pins into plastic housings on a bench fixture; about 241 N of practical extend force at 0.5 MPa suits light interference fits.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X35-10S the Right Cylinder?
Check the neighbours before ordering: a 25 mm bore saves space but only makes 245 N at 0.5 MPa, while the 40 mm bore more than doubles the push to 628 N. This 32 mm unit carries its 402 N through a 35 mm stroke - ideal where travel is short and force is not. FA flange or LB foot mounting, I / Y knuckles optional; the adjustable variant omits the SDB and back-cover code. Note the stop screw is a position setter only: with the air supply removed, nothing prevents the rod from being back-driven, so fit a mechanical lock if the load must hang.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X35-10S FAQ
At 0.5 MPa the 32 mm bore gives 402.2 N extend and 345.6 N retract; at 0.7 MPa extend force is 563.0 N (retract 483.8 N); theoretical maximum is 82 kgf at 1.0 MPa. Pressure range 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi).
Yes - the variable air cushion is built into the covers and keeps decelerating the piston at any position within the 10 mm adjustment window. Because the cushion absorbs the energy rather than the front cover, you can push cycle speed toward the 800 mm/s ceiling without metal-to-metal stops.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X35-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.