Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X60-30S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X60-30S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X60-30S
A 30 mm window gives the MACJ32X60-30S wide on-site flexibility: turn the stop screw and the extend stroke lands anywhere up to 30 mm short of the full 60 mm travel. Underneath sits the familiar AirTAC MA recipe - a stainless round barrel rolled onto aluminium covers with a hard-chrome 12 mm rod - double-acting with a variable air cushion at each end. At 0.5 MPa the 32 mm bore pushes 402.2 N and pulls 345.6 N.
For vertical work, the push force converts to roughly 41 kg of lift, and planning for about 20 kg keeps a clean 2:1 margin on a real part weight. The variable cushion can also be tuned per end, so a faster 30-800 mm/s cycle stays quiet even when the load sits near 241 N.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X60-30S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X60-30S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X60-30S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X60-30S Is Used
Pallet-nesting probe
Rides ahead of a forklift fork to confirm pallet seat; the 30 mm window absorbs tolerance between pallet designs and 402 N push at 0.5 MPa survives repeated contact.
Tote-lid press
Snaps lids onto 20 kg plastic totes at end of line; the halved lift margin of about 20 kg keeps the actuator well inside its comfort zone.
Rotary-index detent
Drops a detent pin into a 4-station dial plate; the dual air cushion lets the pin index at 500 mm/s without metal-to-metal noise.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X60-30S the Right Cylinder?
If 402 N at 0.5 MPa oversizes the task, the MACJ25 delivers 245.3 N in the same round format; if the load climbs, the MACJ40 at 628.3 N is the next step up. Remember the adjuster is a positioning stop only - it will not hold a vertical load if air is lost, so fit a blocking valve where that matters. Foot (LB) and flange (FA) mounts, I and Y knuckles, and the standard-built-in magnet keep integration simple.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X60-30S FAQ
Figures for the 32 mm bore: 402.2 N push and 345.6 N pull at 0.5 MPa, climbing to 563.0 N push and 483.8 N pull at 0.7 MPa; the theoretical peak is 82 kgf at 1.0 MPa. Supply 0.15-1.0 MPa (22-145 psi) filtered air.
The tube is stainless steel rolled to the aluminium covers in a riveted pack, with a 20 um hard-chrome layer on the carbon-steel rod. That combination shrugs off mild corrosion and rinse-down far better than painted-steel mini cylinders of this size.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ32X60-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.