Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X160-75S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X160-75S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø40mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ40 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X160-75S
Wide latitude on one catalog number: order the MACJ40X160-75S with 75 mm of trim range and any extend stroke from 85 mm to the full 160 mm is available by turning the external stop screw. The 40 mm bore pushes 628 N and pulls 528 N at 0.5 MPa (880 N and 739 N at 0.7 MPa), enough to lift about 32 kg vertically with a 2:1 margin.
Both ends carry a variable air cushion, so heavier loads can be decelerated gently near 800 mm/s rather than slamming the covers. A stainless barrel, hard-chrome rod and riveted aluminium heads give the round body its sealed, washdown-friendly character; the magnet is standard, ready for CMSG, DMSG or EMSG switches.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X160-75S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X160-75S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X160-75S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X160-75S Is Used
Pallet-nailer feed
A nail-head setting ram switches between pallet patterns by re-trimming the stroke anywhere in the 85-160 mm spread, no new brackets required.
Hopper gate metering
Lifting roughly 32 kg of gate and linkage, the cylinder meters discharge from a small powder hopper and seats the gate with a cushioned close.
Test rig actuation
A fatigue-test fixture uses the full window to vary deflection between specimens, with an EMSG switch logging each end of travel.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X160-75S the Right Cylinder?
At 628 N of push at 0.5 MPa this bore doubles the 32 mm size (402 N) and sits below the 50 mm bore (981 N) for heavier pressing work. The 75 mm window is the widest trim range in the series, ideal when fixture variants differ a lot. Note the adjuster shortens extend travel only and never acts as a mid-stroke lock; for suspended loads use external restraint. FA flange or LB foot plus optional I or Y knuckles cover most frame layouts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X160-75S FAQ
At 0.5 MPa: 628 N extend force, 528 N retract. At 0.7 MPa: 880 N extend, 739 N retract. Maximum theoretical output is 128.1 kgf at 1.0 MPa. Operating pressure 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-800 mm/s.
The barrel is stainless steel and the 16 mm rod is hard-chrome plated to 20 um, a pairing that resists corrosion far better than painted mini cylinders. Add the standard magnet with a CMSG switch if you need position confirmation in the same wet zone.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X160-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.