Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X60-50S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X60-50S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø40mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ40 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X60-50S
The widest trim in this family, a 50 mm window, makes the MACJ40X60-50S the pick when one cylinder must serve several product variants on the same fixture. It is double-acting with variable air cushion at each end, and its stainless round barrel with a 20 um hard-chrome plated rod stands up to damp, dusty or lightly washed environments. Push at 0.5 MPa is 628 N, which is 64 kgf; halving that gives a 32 kg vertical lift you can quote with a safety margin, or about 377 N of continuous working force.
The built-in magnet is standard, so CMSG / DMSG / EMSG switches mount immediately for position feedback. 40 um filtered air, 0.15-1.0 MPa (22-145 psi) and -20 to +70 C keep installation simple. The extend stop shortens travel only and never acts as a load lock when pressure fails.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X60-50S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X60-50S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X60-50S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X60-50S Is Used
Multi-SKU box stopping
One stopper cylinder serves tall and short cartons on a sorter by re-trimming the 50 mm window between SKUs; cushions keep every stop silent.
Height-gauging stations
The extend stop positions a go/no-go gauge head above aluminium castings; EMSG on the standard magnet confirms the gauge has returned home.
Soft-jaw vise actuation
Air at 0.5 MPa closes a soft-jaw vise on brass fittings with about 628 N, and the magnet drives a CMSG switch for cycle-complete signalling.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X60-50S the Right Cylinder?
Sizing against neighbours: the 32 mm bore (402.2 N push) suits lighter gates, the 40 mm bore here gives 628.3 N push and 527.8 N pull at 0.5 MPa, and the 50 mm bore reaches 981.3 N when forces climb. Keep continuous loads around 60 percent of push, near 377 N, for long seal life.
FA flange or LB foot mount, plus I or Y knuckles for swinging links, cover most frame needs. At 60 mm stroke with a 16 mm rod, buckling and bending are non-issues at these pressures, but still avoid applying side loads to the rod directly. Since the stop is a position setter, add a locking valve if a suspended load must stay put on air loss.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X60-50S FAQ
628.3 N push and 527.8 N pull at 0.5 MPa; 879.6 N push and 738.9 N pull at 0.7 MPa; peak 128.1 kgf theoretical. Bore 40 mm, rod 16 mm, 1/8" air ports, 60 mm stroke, 50 mm extend trim window, dual-end air cushion, 30-800 mm/s, 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi).
None cost extra: the piston magnet is fitted as standard on every MACJ. CMSG, DMSG and EMSG switches mount directly on the stainless barrel for end-of-stroke detection, no special-order piston required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ40X60-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.