Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X200-50S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X200-50S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø50mm bore and 200mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ50 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X200-50S
Need a long trimming band? The MACJ50X200-50S lets the extend stroke of a 200 mm, 50 mm bore cylinder be dialed anywhere within a 50 mm window, double-acting with a variable cushion at each end. Push at 0.5 MPa is 981.3 N against 880.8 N on the return - in practical terms, budget about 589 N for the actual job to keep seal life long.
Construction is a riveted round barrel in stainless steel with a hard-chrome plated carbon-steel rod, so damp food-plant or outdoor air is not a problem. The magnet comes standard, letting CMSG, DMSG or EMSG switches report end positions from day one, and the dual cushions let you push cycle speeds toward 800 mm/s without cover damage.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X200-50S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X200-50S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø50 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X200-50S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X200-50S Is Used
Case ejector on a carton line
Kicking finished cases off a belt needs mid-range thrust: 981 N at 0.5 MPa clears a case row, and the 50 mm band tunes ejection distance per SKU.
Lift gate under a hopper
A small ingredient hopper weighing about 45 kg can be lifted vertically with margin - 981.3 N equals roughly 100 kgf, halved for a 2:1 safety factor.
Weld fixture part clamp
In a weld cell, clamping brackets before spatter flies; the stainless body tolerates coolant mist, and the stop screw sets clamp travel per part family.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X200-50S the Right Cylinder?
Sizing check: a 40 mm bore delivers 628.3 N at 0.5 MPa while a 63 mm bore gives 1557.9 N, so pick the 40 for lighter clamps and the 63 for heavy press-fit work. With 200 mm of stroke, watch side load - long strokes amplify rod bending, so guide the load externally rather than cantilevering it on the 16 mm rod. Choose FA flange or LB foot mounts; note the adjustable version has no SDB or back-cover mounting codes.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X200-50S FAQ
Push is 981.3 N and pull 880.8 N at 0.5 MPa; step up to 0.7 MPa for 1373.8 N push and 1233.1 N pull. Theoretical maximum at 1.0 MPa is 200.1 kgf. Pressure range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-800 mm/s with air filtered to 40 um.
No. It sets where the extend stroke ends within the 50 mm window, but it is not a mid-stroke lock or brake - if air pressure is lost the piston drifts. For positive holding, add a locking valve or external mechanical latch to the circuit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X200-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.