Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X225-100S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X225-100S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø50mm bore and 225mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ50 mm
- Stroke225 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X225-100S
Real muscle in a round stainless body: the MACJ50X225-100S pushes 981.3 N at 0.5 MPa and 1373.8 N at 0.7 MPa while letting you trim the extend stroke anywhere within a generous 100 mm window using its external stop screw. Double-acting with a variable air cushion at both ends, it soaks up end-of-stroke shock so you can run 30-800 mm/s over the 225 mm travel without hammering the aluminium covers. Working pressure is 0.15-1.0 MPa (22-145 psi), with up to 200.1 kgf of theoretical force on tap.
Roughly 100 kgf of vertical lift sits in this bore on paper, so halving for a 2:1 margin you can lift about 50 kg vertically and still keep reserve. The riveted stainless barrel shrugs off mild corrosion and washdown, a genuine edge over painted-steel minis in damp food or outdoor spots, and the magnet is built in as standard so CMSG / DMSG / EMSG switches drop straight on.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X225-100S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X225-100S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø50 mm |
| Stroke | 225 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X225-100S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 50 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X225-100S Is Used
Can-line reject pusher
Knocks off-weight cans off a washdown beverage conveyor; the stainless barrel shrugs off caustic rinse while 981 N at 0.5 MPa clears a full lane.
Hopper slide-gate setting
On a flour hopper the 100 mm window lets maintenance set the discharge opening anywhere from 125 to 225 mm without re-piping the air side.
Pallet-carton diverter
Diverts cartons at a dock conveyor with 1373.8 N available at 0.7 MPa, cushioned at both ends so boxes do not jump the rail.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X225-100S the Right Cylinder?
Need less muscle? The 40 mm bore pushes 628.3 N at 0.5 MPa; need more, step to 63 mm for 1557.9 N. Ports on this bore are 1/4 in. and the male rod thread is M14x1.5. Mount with the FA flange or LB foot, or add an I or Y rod knuckle for swivel joints. The stop screw is a mechanical end stop for the extend stroke only: on air loss the piston can still drift, so use a locking valve for true holding. Over a 225 mm stroke keep side loads off the rod or guide the load externally to avoid bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X225-100S FAQ
At 0.5 MPa it pushes 981.3 N and pulls 880.8 N; at 0.7 MPa that rises to 1373.8 N push and 1233.1 N pull, with a theoretical maximum of 200.1 kgf at 1.0 MPa. The bore is 50 mm, stroke 225 mm with a 100 mm adjustable window on extend, double-acting with a variable air cushion at both ends, speed 30-800 mm/s, port 1/4 in., rod thread M14x1.5.
No. Every MA-series cylinder ships with the magnet built in, so CMSG, DMSG and EMSG reed or electronic switches mount directly on the 50 mm barrel and read end-of-stroke positions without a special piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X225-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.