Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X50-10S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X50-10S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø50mm bore and 50mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ50 mm
- Stroke50 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X50-10S
A riveted round body, not a tie-rod stack: the MACJ50X50-10S pairs a stainless-steel barrel with a hard-chrome plated carbon-steel rod and rolled aluminium-alloy covers, so damp washdown corners and outdoor panels do not chew it up the way painted minis suffer. Double-acting with variable air cushions at both ends, it trims the extend stroke anywhere within a 10 mm window using the built-in stop screw.
At 0.5 MPa the 50 mm piston pushes 981.3 N, which means roughly 589 N of usable work once you keep a sensible margin - enough to seat or date-stamp carton lids all day. A built-in magnet is standard, so CMSG, DMSG or EMSG switches clip straight on, and the dual cushions let you run up to 800 mm/s without hammering the covers.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X50-10S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X50-10S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø50 mm |
| Stroke | 50 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X50-10S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X50-10S Is Used
Carton date coder
Short, crisp presses over the 10 mm trim window suit ink or embossing heads that must sit at a repeatable height on a dairy carton line.
Fixture clamp
Drill-jig and swing clamps on small machining fixtures get 981 N of clamp force with the stop set to the part height.
Part present check
With a CMSG switch clipped to the standard magnet, the cylinder confirms a bracket is seated before the next press cycle starts.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X50-10S the Right Cylinder?
Compare bores at 0.5 MPa push: a MACJ40 delivers 628.3 N and a MACJ63 reaches 1557.9 N, so the 50 mm at 981.3 N sits mid-range for clamps and short presses. Keep real loads near 589 N in service. The stop screw is a mechanical end stop only - it sets the extend position but does not lock the piston against drift when air is lost, so add a locking valve if holding matters.
Mount with an FA flange or LB foot and pair with I or Y rod knuckles if the load pivots (the adjustable version has no SDB option). At this 50 mm stroke side-load is rarely an issue, but keep the rod square to the load anyway; ports are 1/4" (PT as standard, G or NPT on request) and the male rod thread is M14x1.5.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X50-10S FAQ
At 0.5 MPa it pushes 981.3 N and pulls 880.8 N; at 0.7 MPa those figures rise to 1373.8 N and 1233.1 N. The theoretical maximum is 200.1 kgf at 1.0 MPa. Keep practical loads near 589 N for long seal life, and remember the 10 mm stop screw only sets the extend position - it does not lock the piston.
The barrel is stainless steel with a hard-chrome plated carbon-steel rod and riveted aluminium covers, so mild washdown, humidity and outdoor exposure are far less damaging than on painted-steel minis. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, and both ends carry a variable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ50X50-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.