Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X110-30S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X110-30S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø63mm bore and 110mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ63 mm
- Stroke110 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X110-30S
The largest bore in AirTAC's MA series, the MACJ63X110-30S pushes 1557.9 N (about 158 kgf) at 0.5 MPa and 2181.0 N at 0.7 MPa, double-acting in both directions. The -30 in the code is a 30 mm adjust window: an external stop screw trims the extend stroke anywhere inside that range on site, and a variable air cushion at each end soaks up end-of-travel shock.
A riveted stainless-steel barrel with a hard-chrome plated rod shrugs off washdown mist and outdoor damp far better than painted minis. Every unit ships with the magnet already fitted, so CMSG, DMSG or EMSG switches clip straight on without a special-order piston. At 0.5 MPa the rod lifts roughly 79 kg vertically once you halve the 158 kgf figure for a 2:1 margin - size your clamp or lift against that, not the full rating.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X110-30S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X110-30S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø63 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X110-30S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X110-30S Is Used
Pallet clamp on a CNC line
1560 N class push clamps aluminium housings in a machining fixture; the 30 mm window lets the setter dial the exact clamp position per pallet.
Case ejector on a carton packing line
Culls misprinted cartons off the belt at up to 800 mm/s; end cushions stop the throw without hammering the head.
Lift gate on a sorting chute
Raises about 79 kg gate plates vertically with margin; a DMSG switch fed by the built-in magnet signals the raised position to the PLC.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X110-30S the Right Cylinder?
Against the 50 mm bore (981.3 N push at 0.5 MPa) this 63 mm model gives you about 59% more force per cycle, and no larger bore exists in the range, so move to a bigger series if 1557.9 N is still marginal. Keep in mind the adjuster is a mechanical end stop, not a lock: with air off the rod still drifts, so support the load or fit a valve that blocks the ports.
Mount FA flange or LB foot; I and Y rod knuckles suit pivoting tooling. With a 110 mm stroke and a 16 mm rod, keep side loads off the rod or guide them externally - at 30-800 mm/s the variable cushion handles a fast approach, but rod bending it will not.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X110-30S FAQ
At 0.5 MPa it pushes 1557.9 N and pulls 1457.4 N; at 0.7 MPa push rises to 2181.0 N and pull to 2040.3 N. Theoretical maximum at 1.0 MPa is 317.7 kgf. Working pressure spans 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, and a 1/4" port feeds both directions on the 110 mm stroke.
No. The magnet is built in as standard on every MA-series cylinder, so CMSG, DMSG and EMSG switches mount directly on the stainless barrel and feed a PLC signal with no special-order piston needed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X110-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.