Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X150-100S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X150-100S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø63mm bore and 150mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ63 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X150-100S
Long reach meets the top force class of the MA family: the MACJ63X150-100S runs a 63 mm bore over 150 mm of stroke, and the stop screw lets you shorten the extend travel anywhere inside the 100 mm window without swapping cylinders. Variable air cushions at both ends decelerate the load, so even at 800 mm/s the covers stay protected cycle after cycle.
Force at 0.5 MPa is about 1558 N push and 1457 N pull, climbing to 2181 N at 0.7 MPa; the theoretical ceiling is 317.7 kgf at 1.0 MPa. Plan real work around 935 N of push, and treat the pull stroke as good for roughly 79 kg of vertical lift with a 2:1 margin. The stainless rolled barrel and hard-chrome 16 mm rod resist corrosion in damp plants, and the standard magnet accepts CMSG, DMSG or EMSG switches anywhere along the travel.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X150-100S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X150-100S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X150-100S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X150-100S Is Used
Mold ejector on an injection press
Pushes tall sprue plates clear of the mold; the 100 mm trim window matches different mold heights without reordering cylinders.
Pallet stopper gate
Raises roller-conveyor stoppers around a 79 kg equivalent load; the cushioned landing avoids jolting the product.
Slide feed on a special machine
Feeds a machining slide up to 150 mm per cycle; the stroke is trimmed on site to the fixture, saving a new order when tooling changes.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X150-100S the Right Cylinder?
This is the largest bore and among the longest strokes in the MA series; a 50 mm unit saves air at 981 N push and 881 N pull at 0.5 MPa if the load is lighter. The stop screw is an end stop for the extend stroke only - it cannot hold position mid-stroke, and the rod still moves if air is lost. Over 150 mm even small side loads will bend a 16 mm rod, so guide the payload externally or combine FA flange with LB foot for a rigid fixed line; I and Y knuckles suit pivoting links.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X150-100S FAQ
Push is about 1557.9 N and pull about 1457.4 N at 0.5 MPa; at 0.7 MPa push reaches 2181.0 N and pull 2040.3 N, with a theoretical maximum of 317.7 kgf at 1.0 MPa. It runs on 0.15-1.0 MPa (22-145 psi) at 30-800 mm/s.
Yes - the piston magnet is built in as standard, so CMSG, DMSG or EMSG switches clamp onto the stainless barrel at any point. Since the adjuster is a mechanical stop rather than a sensor, use a switch when you need electrical confirmation of the trimmed end position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X150-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.