Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X160-10S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X160-10S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø63mm bore and 160mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ63 mm
- Stroke160 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X160-10S
Fine positioning, not wide changeovers, is what the 10 mm window on this MACJ63X160-10S is for: once mounted, the extend stroke can be shaved by up to 10 mm to hit a seating point exactly. The 63 mm bore still delivers 1557.9 N at 0.5 MPa and 2181.0 N at 0.7 MPa, double-acting, with a variable cushion at both ends to land the load quietly.
AirTAC rolls the aluminium covers onto a stainless barrel and hard-chrome plates the 16 mm rod, so humid workshops and rinse-down zones are fine territory for this mini. Speed spans 30-800 mm/s at 0.15-1.0 MPa (22-145 psi). Converted to lifting terms, 0.5 MPa equals about 158 kg of vertical push; keep roughly 79 kg as the practical payload with a 2:1 margin and the cylinder always holds reserve.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X160-10S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X160-10S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø63 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X160-10S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 63 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X160-10S Is Used
Glue nozzle final seating
Positions a hot-melt glue head onto carton seams; the 10 mm window sets exact nozzle contact depth after install, and 1557.9 N holds the head firm.
Assembly press final seating
Seats bearings into housings on a small assembly press; trim the last 10 mm so seating depth matches each housing batch without retooling.
Spring-rate check fixture
Compresses test springs in a QA fixture to a fixed landing point; the cushion gives a soft stop so the force gauge reads true every cycle.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X160-10S the Right Cylinder?
Against neighbours: the 50 mm bore pushes 981.3 N at 0.5 MPa and may be enough if working loads sit near 590 N; this 63 mm unit keeps 1557.9 N in hand for stiffer jobs, and no bigger MA bore exists. The tight 10 mm window fits final-trim tweaks such as seating a part a few mm deeper, not broad changeovers. FA flange and LB foot mounts, plus I/Y knuckles, cover the fixings. On a 160 mm stroke avoid rod side load and add a linear guide if the load cannot run true. The stop screw defines the landing point only - for load holding, close a valve, because the rod can still move on air loss.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X160-10S FAQ
At 0.5 MPa: 1557.9 N extend, 1457.4 N retract. At 0.7 MPa: 2181.0 N extend, 2040.3 N retract. Maximum theoretical output is 317.7 kgf at 1.0 MPa. The bore is 63 mm, ports are 1/4", the rod is 16 mm with M14x1.5 male thread, and the extend stroke trims within a 10 mm window.
Both come as standard. The piston magnet works with CMSG, DMSG or EMSG switches for end-position signalling, and the variable air cushion at each end is set by screw, damping the final travel at speeds up to 800 mm/s. Mount on an FA flange or LB foot, with I or Y rod knuckles where the load needs articulation.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X160-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.