Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X200-30S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X200-30S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø63mm bore and 200mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ63 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X200-30S
AirTAC's riveted round-body MACJ63X200-30S packs 1557.9 N of push at 0.5 MPa into a stainless-steel mini barrel, and its stop screw trims the extend stroke anywhere inside a 30 mm window on site. Raise supply to 0.7 MPa and the same bore delivers 2181 N, while a variable air cushion at both ends soaks up end-of-stroke shock so the covers survive fast, heavy cycles.
The 16 mm hard-chrome plated rod shrugs off mild corrosion in damp and washdown-prone corners, a real edge over painted-steel minis. For sizing, budget about 935 N of usable push (60% of the rating), which lifts roughly 79 kg vertically with a 2:1 margin. A magnet is built in as standard, so CMSG, DMSG or EMSG switches clip straight on, and the cylinder runs on 0.15-1.0 MPa (22-145 psi) at 30-800 mm/s.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X200-30S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X200-30S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X200-30S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X200-30S Is Used
Welding fixture clamping
The 30 mm trim lets you dial clamping reach after fixturing; 1558 N of push at 0.5 MPa clamps heavy steel plate without re-shimming.
Benchtop marking press
At 0.7 MPa the bore reaches 2181 N, enough for shallow riveting and stamping marks, while the cushions stop the ram from bouncing at the adjusted stop.
Position-checked ejection
The standard magnet with a DMSG switch confirms the ejector reached the trimmed end stop before the next carton is released on the packing line.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X200-30S the Right Cylinder?
Compare bores on real numbers: the next size down, a 50 mm MACJ, gives only 981.3 N of push at 0.5 MPa, so if your press or clamp needs more than about 900 N of working force the 63 mm barrel is the right call. The adjuster is a mechanical extend stop, not a mid-stroke lock - on air loss the piston can still drift, so hold loads with a blocking valve or external brake.
Mount with the FA flange or LB foot and match an I or Y rod knuckle to your linkage. Over a 200 mm stroke, keep side load off the rod or guide the load externally to protect the seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X200-30S FAQ
At 0.5 MPa it pushes with 1557.9 N and pulls with 1457.4 N; at 0.7 MPa those rise to 2181 N push and 2040.3 N pull. Theoretical maximum force at 1.0 MPa is 317.7 kgf. Supply 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-800 mm/s, double-acting with a 30 mm adjustable extend window.
An external stop screw shortens the extend stroke anywhere within the 30 mm window of the ordered 200 mm stroke; it cannot lengthen the stroke beyond that. It acts as an end stop only, not a load-holding brake, and the variable air cushion at both ends still decelerates the piston over the reduced travel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X200-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.