Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X40-10S
The AirTAC Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X40-10S is a genuine double acting, adjustable stroke + cushion standard round-body mini air cylinder with a Ø63mm bore and 40mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ63 mm
- Stroke40 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X40-10S
Dia 63 force in a compact 40 mm stroke: the MACJ63X40-10S delivers 1558 N of push at 0.5 MPa (22-145 psi) with a 10 mm extend-trim and variable air cushions at both ends, hitting a theoretical 318 kgf.
Its stainless round barrel and hard-chrome plated 16 mm rod stand up to humid, washed-down or outdoor conditions far better than painted mini bodies. Working numbers for the buyer: plan on roughly 935 N of real push at 0.5 MPa, which matches lifting about 79 kg vertically on a 2:1 margin.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X40-10S Technical Specifications
| Model | Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X40-10S |
|---|---|
| Series | MACJ mini cylinder |
| Bore size | Ø63 mm |
| Stroke | 40 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X40-10S
| MACJ | Standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 63 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X40-10S Is Used
CNC fixture clamp
Clamping cast housings on a machining table, the 40 mm stroke cycling fast while cushions protect the covers.
Filling nozzle hold-down
Seating filling nozzles onto drums on a chemical line, using the 10 mm trim to set seat depth precisely.
Roller spur stopper
Stopping a pallet roller spur in a warehouse conveyor, where the 1558 N push at 0.5 MPa (22-145 psi) halts loaded pallets.
Is the Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X40-10S the Right Cylinder?
Sizing check both directions: a Dia 50 cylinder gives 981 N at 0.5 MPa (22-145 psi) if the load is lighter, while the 63 bore is the MA series ceiling for anything heavier. Treat the 10 mm stop screw as an extend-stroke limit only and never as a load-holding device, since the rod drifts on air loss. Mount with an FA flange or LB foot, add I or Y rod knuckles where needed, and note the magnet is included as standard for CMSG, DMSG and EMSG switches. Air feeds a 1/4 inch PT port (G or NPT optional) at 30-800 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X40-10S FAQ
Push 1558 N and pull 1457 N at 0.5 MPa (22-145 psi); push 2181 N and pull 2040 N at 0.7 MPa; 318 kgf theoretical maximum at 1.0 MPa (145 psi). Dia 63 bore, 16 mm chrome rod with M14x1.5 male thread, 1/4 inch port, extend stroke adjustable over 10 mm.
FA flange and LB foot cover fixed mounts, while I and Y rod knuckles suit pivoting loads; the adjustable version carries no SDB or back-cover code. The standard built-in magnet works with CMSG, DMSG and EMSG switches straight out of the box, and the stainless barrel tolerates damp environments.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MACJ Cylinders
Request a Quote for Airtac MACJ Stainless Steel Mini Adjustable Cylinder MACJ63X40-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.