Airtac PTB Single Acting Pen-Type Cylinder PTB10X60R
The AirTAC Airtac PTB Single Acting Pen-Type Cylinder PTB10X60R is a single acting, pull type (spring extend) pen-size mini cylinder with a Ø10mm bore and 60mm stroke. A single air port drives the pull stroke; the built-in return spring resets the rod when air is released, so only one solenoid line is needed.
- BoreØ10 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typePull, single acting
- Rod threadM8×1.0
- ReturnSpring
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PTB Single Acting Pen-Type Cylinder PTB10X60R
The AirTAC PTB10X60R is a JIS pen-size single-acting pull cylinder with a 60 mm stroke. Air entering the M5x0.8 port retracts the rod, while an internal spring pushes it back out upon exhaust release. This provides a fail-safe extended state during air loss, ideal for return-to-home or hold-down tasks. You get about 23.5 N of net pull at 0.5 MPa.
Built with a SUS304 stainless barrel and a slim mini body, it saves space in tight jigs. The Ø4 mm rod has an M8x1.0 end thread. A fixed TPU bumper cushions the stroke ends. Because pulling acts on the rod-side area, this output is lower than a matching push cylinder. Plan for a safe working load of roughly 14 N to account for seal friction and smooth travel.
Airtac PTB Single Acting Pen-Type Cylinder PTB10X60R Technical Specifications
| Model | Airtac PTB Single Acting Pen-Type Cylinder PTB10X60R |
|---|---|
| Series | PTB JIS pen-size mini cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 60 mm |
| Acting type | Single acting, pull type (spring extend) |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Return | Return spring (pull by air) |
| Max standard stroke | Up to 60 mm |
The spring holds the rod extended; applying air retracts it, and removing air lets the spring push the rod back out. Forces below are the NET spring-deducted values from the AirTAC thrust table. Confirm against the product label before installation.
Net Pull Force (Ø10mm)
| Pressure | Net pull force |
|---|---|
| 0.5 MPa | 23.5 N |
| 0.7 MPa (max) | 36.7 N |
These are the usable pull forces after the return spring is subtracted, taken directly from the AirTAC single-acting thrust table. Minimum operating pressure is set by the spring, so this model needs at least the lower pressure shown to move.
Model Code: Airtac PTB Single Acting Pen-Type Cylinder PTB10X60R
| PTB | JIS pen-size single acting, pull type (spring extend) mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| R | Back cover: R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PB (double acting), PSB (single-acting push), PBD (double rod), PBR (front-mount).
Where the Airtac PTB Single Acting Pen-Type Cylinder PTB10X60R Is Used
Hold-Down Clamp
Keeps a workpiece clamped by default. Air pulls the rod back to release the part, automatically re-clamping if air pressure drops.
Wire Tensioner
Maintains steady tension on a wire or belt. The spring extends the rod to pull material taut, with air retracting to slacken the line.
Retract-to-Open Gate
Holds a sorting gate closed via spring force. A single air line retracts the rod to open the gate, simplifying valving on the conveyor.
Is the Airtac PTB Single Acting Pen-Type Cylinder PTB10X60R the Right Cylinder?
This 10 mm bore hits the 60 mm maximum single-acting stroke limit. It yields 23.5 N net pull at 0.5 MPa and 36.7 N at 0.7 MPa. If your task needs less force, the Ø6 bore offers 7.1 N at 0.5 MPa. For heavier pulling, the Ø12 bore provides 33.1 N at 0.5 MPa. The internal spring requires at least 0.2 MPa before motion begins.
The R suffix specifies an axial inline air inlet. Without live air, the spring holds the rod extended. The thin Ø4 mm rod is built for coaxial thrust, so over this long 60 mm stroke you should add an external guide or linear bearing to prevent side-load damage.
Quick checklist
- ✓ Net pull force at your working pressure
- ✓ Only one air line / solenoid needed
- ✓ Fail-safe extend on air loss
- ✓ Magnet (S) for sensors?
- ✓ Stroke ≤ 60 mm (single-acting limit)
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 0.7 MPa operating pressure.
- check Allow for spring force in the stroke direction.
- check Do not add an external return mechanism.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PTB Single Acting Pen-Type Cylinder PTB10X60R FAQ
The net pull force is 23.5 N at 0.5 MPa and 36.7 N at 0.7 MPa. The internal return spring sets a minimum operating pressure of 0.2 MPa before the rod can move. Without air, the spring fail-safely holds the rod extended.
A fixed TPU bumper decelerates the rod at both stroke ends. It only absorbs the last few millimeters, so at high speeds with real tooling mass you should meter-out the exhaust or add an external shock absorber. This specific model lacks a magnetic piston, so position sensors cannot be fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PTB Pen-Size Cylinders
Request a Quote for Airtac PTB Single Acting Pen-Type Cylinder PTB10X60R
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.