Airtac SAI40 Standard Air Cylinder SAI40X30
The AirTAC Airtac SAI40 Standard Air Cylinder SAI40X30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 30mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ40 mm
- Stroke30 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI40 Standard Air Cylinder SAI40X30
The AirTAC SAI40X30 is a double-acting ISO 15552 profile cylinder engineered for compact actuation, delivering a robust 628 N of push force at 0.5 MPa. Its 30 mm stroke is tailored for short-travel clamping, ejection, and indexing tasks where space is restricted but reliable power is required.
This extruded aluminum barrel design incorporates dual sensor grooves compatible with DMSE switches when a magnet is specified. Furthermore, operators can optimize environmental resilience by selecting NBR seals for general pneumatic duties or upgrading to Viton for high-temperature zones.
Airtac SAI40 Standard Air Cylinder SAI40X30 Technical Specifications
| Model | Airtac SAI40 Standard Air Cylinder SAI40X30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI40 Standard Air Cylinder SAI40X30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI40 Standard Air Cylinder SAI40X30 Is Used
Short-Stroke Clamping
Ideal for securely holding lightweight machined components during secondary milling or drilling operations.
Package Ejection
Provides rapid, targeted push-offs for diverting small cartons or products between adjacent conveyor lines.
Indexing Gates
Drives compact sorting flaps and indexing mechanisms where a brief 30 mm travel distance is required.
Is the Airtac SAI40 Standard Air Cylinder SAI40X30 the Right Cylinder?
If your layout demands even less footprint and can operate on 402 N of push force at 0.5 MPa, the 32 mm bore variant is a logical step down. Conversely, stepping up to the 50 mm bore yields 982 N for heavier resistance. Because this 30 mm stroke is very short, side-load stress on the rod bearing is naturally minimized.
This unit utilizes a PT tapered G1/4 port and a carbon steel rod as standard. It serves as a dimensionally interchangeable drop-in replacement for any standard ISO 15552 cylinder. Remember that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load if air pressure drops, so deploy an external rod lock for fail-safe positioning.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI40 Standard Air Cylinder SAI40X30 FAQ
At a 0.5 MPa operating pressure, this 40 mm bore cylinder generates 628 N of push force and 528 N of pull force. Increasing the supply to 0.7 MPa yields 879 N of push force.
Yes, the SAI40X30 is a genuine ISO 15552 profile cylinder, making its mounting interface dimensionally interchangeable with equivalent ISO 15552 cylinders from other manufacturers.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI40 Standard Air Cylinder SAI40X30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.