Airtac SAI40 Standard Air Cylinder SAI40X380
The AirTAC Airtac SAI40 Standard Air Cylinder SAI40X380 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 380mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ40 mm
- Stroke380 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI40 Standard Air Cylinder SAI40X380
The AirTAC SAI40X380 is a double-acting ISO 15552 profile cylinder featuring a 40mm bore and a 380mm stroke. It generates 879N of push force at 0.7 MPa, making it suitable for medium-duty handling tasks. The extruded aluminum barrel omits tie-rods, providing a clean exterior while maintaining strict dimensional interchangeability with other ISO 15552 cylinders.
This configuration utilizes a standard carbon steel piston rod and tapered PT G1/4 ports. Because it lacks a magnet, it does not support internal reed sensors; if proximity detection is required, an -S variant with dual-side sensor grooves for CMSE or DMSE switches would be necessary.
Airtac SAI40 Standard Air Cylinder SAI40X380 Technical Specifications
| Model | Airtac SAI40 Standard Air Cylinder SAI40X380 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 380 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI40 Standard Air Cylinder SAI40X380
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×380 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI40 Standard Air Cylinder SAI40X380 Is Used
Package Sorting Diverter
Ideal for diverting medium-weight packages on a conveyor line where the 879N thrust at 0.7 MPa easily overcomes friction and the 380mm stroke provides ample reach.
Component Pusher
Used to push machined parts into staging bins, utilizing the full 380mm travel distance to clear the machining area safely.
Material Lift Station
Drives a vertical lifting platform for light-gauge materials, where the double-acting action ensures positive control in both directions.
Is the Airtac SAI40 Standard Air Cylinder SAI40X380 the Right Cylinder?
Providing 628N of push force at 0.5 MPa, this 40mm bore is an upgrade from the 32mm bore (402N) for applications needing extra thrust without stepping up to the larger 50mm bore (982N). The 380mm stroke falls within the 1200mm standard limit for this bore, but because it exceeds 300mm, side loads can cause severe bending stress on the rod bearing. Employing an external guide rail or a fully guided cylinder is strongly recommended to prevent premature seal wear.
As a standard pneumatic actuator, this cylinder relies on live air pressure to move and hold its position; it will drift if air is removed. It is dimensionally interchangeable with other ISO 15552 profile cylinders using the same 40mm bore, 380mm stroke, G1/4 port, and standard mounting accessories like FA flanges or TC trunnions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI40 Standard Air Cylinder SAI40X380 FAQ
The SAI40X380 generates 628N of push force and 528N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 879N.
Yes, the SAI40X380 is a profile cylinder built to ISO 15552 mounting dimensions, making it a drop-in replacement for any standard ISO 15552 40mm bore cylinder with matching stroke and G1/4 port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI40 Standard Air Cylinder SAI40X380
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.